About this Manual
8
• The following style is used to represent menu selections. For a detailed explanation on how to use the menus,
refer to Using the Menus (A 28). For a summary of all available menu options and settings, refer to Menu
Options (A 101).
Before Using the Camcorder
• Before making important recordings for the first time, make test recordings using the video configuration(s) you
plan to use to check that the camcorder operates correctly. Should the camcorder fail to operate correctly,
refer to Troubleshooting (A 108).
• Copyright notice: Unauthorized recording of copyrighted materials may infringe on the rights of copyright
owners and be contrary to copyright laws.
• About the LCD and viewfinder screens: The screens are produced using extremely high-precision manufacturing
techniques, with more than 99.99% of the pixels operating to specification. Very rarely, pixels may misfire or
light up permanently. This has no effect on the recorded image and does not constitute a malfunction.
• Observe the following precautions while the ACCESS indicator (A 12) is illuminated or flashing in red. Failing
to do so may result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the card compartment cover.
- Do not change the camcorder’s operating mode.
- When a USB cable is connected to the camcorder, do not disconnect the USB cable.
This indicates to press
the MENU button.
Brackets [ ] indicate text as it appears on the
camcorder's screen (menu options, onscreen
buttons, messages, etc.).
This arrow indicates a deeper
level in the menu hierarchy or
the next step in a procedure.
1 Select [Initialize] for the desired SD card.
> [3 " Recording Setup] > [Initialize 8] > [6 Mem. Card A]
2 Select [Yes].
The menu page number is given
only for main procedures.
To Next Page
Loading...
Need help?
General
