1
2
If the projector cannot reproduce proper video
image, select a specific broadcast signal format
from among PAL, , , ,
and .
The projector automatically detects an incoming
video signal, and adjusts itself to optimize its
performance.
If the projector cannot reproduce proper video
image, select a specific component video signal
format from among 480i, 575i, , , ,
1035i and 1080i.
The projector automatically detects an incoming
video system, and adjusts itself to optimize its
performance. When VIDEO System is or
, select the system manually.
The AV System Menu cannot be selected when
selecting or HDMI.
Press the MENU button to display the
On-Screen Menu. Use the Point ▲▼ buttons
to select and then press the Point ►
button or the OK button.
Use the Point ▲▼ buttons to select VIDEO,
or
and then press the OK button.
3
Use the Point ▲▼ buttons to select
and then press the Point ► button or the OK
button. Use the Point ▲▼ buttons to select
the desired system and then press the OK
button.
To Next Page
Loading...
Need help?
General
