Canon LV-8235 UST - User Manual

Wired Setting
Projector Set-up and Operation
User’s Manual
Network Set-up and Operation
This is the manual for the Network function.
Read this manual thoroughly to operate the Network function.
First, read the user's manual of the projector to understand the basic
operation of the projector and the safety instructions.
The safety instructions in the user's manuals should be followed strictly.
for LV-8235 UST

Summary

Safety instructions

Safety information

Provides essential safety guidelines, warnings about product handling, electrical hazards, and fire risks.

Chapter 1 Preparation

Chapter 2 Setup Procedures

Connecting to the LAN line

Instructions on how to physically connect the LAN cable to the projector's connection terminal.

Network PIN code

Procedure for setting a Network PIN code to restrict unauthorized network access to the projector.

Network factory default

Chapter 3 Basic Setting and Operation

Login the setting page of the projector

Guide on accessing the projector's setting page via a web browser by entering the IP address.

How to use the setting page

Initial setting

Basic initial setup procedures for the projector, including language, model name, and PIN code.

Network PIN code setting

Instructions to set a 4-digit Network PIN code to restrict unauthorized access.

PJLink and password setting

Network configuration

Details on configuring network settings such as IP address, subnet mask, gateway, and projector name.

E-mail setting

Configuration of the projector's E-mail function for sending alert messages on abnormalities.

SNMP setting

Chapter 4 Controlling the Projector

Power control and status check

Monitor projector status and control power ON/OFF or Standby via the web interface.

Control

Canon LV-8235 UST Specifications

General

Throw Ratio	0.35:1
Projection System	3LCD
Light Source	Lamp
Screen Size	60" - 110"
Zoom Ratio	Fixed
Noise Level (ECO mode)	29 dB
Resolution	WXGA (1280 x 800)
Weight	6.4kg
Connectivity	HDMI, USB
Lens Shift	No
Output Terminals	USB
Power Consumption (Normal)	350W
Operating Temperature	5°C to 35°C