What to do if Canon Scanner screen does not come on?
If your Canon Scanner's screen does not turn on, ensure the lamp unit is correctly fitted into the main unit. Also, check if the lamp is burned out. If “LP” appears on the Error/User Mode display, the lamp is burned out and needs replacement.
What to do if Canon Scanner scan will not start?
If your Canon Scanner won't start after pressing the start key, check that the computer is switched on and has started up correctly. If a User Call Error or Service Call Error is displayed, look it up in the corresponding table.
Why does my Canon Microfilm 300 Scanner show splices on the image after a few scans?
If your Canon Scanner shows splices on the image after scanning, it could be due to your computer's performance. This is sometimes a specification to make up for a computer that isn't powerful enough. Consider upgrading your computer to resolve this. Also, insufficient system resources or work memory may cause this. Try closing all applications and restarting your computer. If you are using MS300, it is recommended to close all other applications.
How to fix out of focus image on Canon Microfilm 300 Scanner?
If your Canon Scanner image is out of focus, try the following: Rotate the focus fin on the lens to adjust the focus. Also, check that the lens and carrier are installed correctly. Ensure that the lens and lamp are clean; if not, clean them.
Why is the image skewed on my Canon Microfilm 300 Scanner?
If your Canon Scanner image is skewed, rotate the rotation fin on the lens to adjust the image. Also, check that the carrier is installed correctly.
Why is the screen brightness uneven on my Canon Scanner?
If your Canon Scanner's screen brightness is uneven or too dark, verify the lens is clean and securely installed. Check that the lamp and lamp unit are securely installed. Also, check the Light Adjustment dial setting to ensure it is correct for the installed lens type.
Provides essential preparatory information and safety guidelines before operating the scanner.
Emphasizes safety precautions and warnings for operating the equipment.
Guidelines for selecting a proper environment for ventilation, operation, and preventing overheating.
Guidelines for connecting and managing the power source and cords for safe operation.
Important warnings and precautions for safe daily operation and handling of the scanner.
Outlines the system requirements for the computer to operate the scanner in scanner mode.
Explains the functionality and usage of the scanner's Reader-Printer mode.
Procedures for fine-tuning image quality, including rotation, zoom, and focus.
Options for removing borders or defining specific scan areas for images.
How to access and configure user-defined settings for the scanner.
Step-by-step guide for replacing the scanner's halogen lamp when it burns out.
Common problems and their solutions for operating the scanner.
Lists common user-correctable error messages and their resolutions.
Explains service-related error codes and what to do when they appear.
General| Type | Microfilm Scanner |
|---|---|
| Resolution | Up to 600 dpi |
| Image Output | TIFF, JPEG, PDF |
| Optical Resolution | 600 dpi |
| Grayscale Levels | 256 levels |
| Interface | USB 2.0 |
| Film Carriers | 16mm and 35mm microfilm, microfiche |
| Document Size | 16mm and 35mm microfilm, microfiche |
To Next Page