What to do if Canon imageFORMULA DR-M260 Scanner does not feed document?
If your Canon Scanner is not feeding documents correctly (or the document has stopped), make sure the roller is correctly installed. Clean the roller if necessary.
Why does my Canon imageFORMULA DR-M260 keep jamming paper?
If your Canon Scanner experiences paper jams, ensure the roller is correctly installed. If jams occur repeatedly, open the scanner driver settings and select [Extra-thin paper] for [Document type] in the [Feeding] tab. If jams happen after roller replacement or cleaning due to document curling, perform 5 single scans of an A4-sized document.
Why Canon Scanner cannot save multiple pages to one file?
Depending on the file format, multiple scanned image pages cannot be saved as a single file with CaptureOnTouch. When you select [Scan Batch to File] from the [Scan] menu in CapturePerfect, a dialog box appears with a [Multi Page Settings] pull-down that allows you to select [Single Page]. If you select [Single Page] here, each page of a multi-page document is saved as a separate image file.
How to fix white lines on scanned images from Canon imageFORMULA DR-M260?
If white lines or streaks appear in scanned images from your Canon Scanner, try cleaning both sides of the scanner glass and the rollers. For sticky substances like glue or correction fluid, gently wipe the affected area. If cleaning doesn't resolve the issue, the internal glass might be scratched, and you should contact your local authorized Canon dealer.
How to fix slanted scanned images from Canon Scanner?
If your Canon Scanner documents feed askew, align the document guides closely to the documents and load them straightly. Open the document feed extension support and place the document. You can also enable [Automatically straightens skewed] in the scanner driver settings. If the problem persists after scanning many pages, clean the rollers; if it continues, roller replacement or maintenance may be needed.
What to do if Canon Scanner is not recognized?
If your Canon Scanner is not being recognized by your computer, first, ensure that the scanner is properly connected with a USB cable and turned on. If it still doesn't work, the computer’s USB interface may not fully support the scanner, or the USB cable may not be compatible, so confirm you are using the supplied USB cable. If connected to USB3.1 Gen1, reconnect to USB2.0 and check. Also, if you're using a USB hub, try connecting the scanner directly to the computer.
Why is my Canon imageFORMULA DR-M260 multifeeding documents?
If your Canon Scanner is multifeeding documents, check that the roller is installed correctly and clean it if necessary. The document will not scan correctly if it is stuck due to static electricity or for any other reason.
Why is my Canon imageFORMULA DR-M260 feeding documents collectively?
If your Canon Scanner is collectively feeding documents, open the scanner driver settings, and clear the check box for [Non Separation Feeding Mode] of the [Feeding] tab. Also, make sure that the roller is installed correctly.
How to turn on Canon imageFORMULA DR-M260 Scanner?
If your Canon Scanner is not turning on, confirm that the AC adapter is plugged firmly into a power outlet.
Why Canon imageFORMULA DR-M260 is not using driver settings?
If your Canon Scanner is not scanning documents according to the settings configured in the scanner driver, when you scan using [Select document] panel registered with CaptureOnTouch, the CaptureOnTouch settings have priority over the scanner driver settings. Edit settings in the [Select document] panel, or create a new [Select document] panel using the desired scanning conditions.
Lists the included accessories with the scanner for initial setup.
Details the hardware and OS requirements for scanner software installation.
Steps to power on the scanner after setup and connection.
Instructions on how to safely turn off the scanner's power.
Crucial safety precautions to ensure safe scanner operation.
Guidelines for choosing an appropriate environment for scanner installation.
Instructions on connecting and using the AC adapter safely.
General precautions for handling the scanner to prevent damage or hazards.
Identifies and explains the components of the scanner's front view.
Identifies and explains the components of the scanner's front view with the tray open.
Identifies and explains the components of the scanner's back view.
Explains the buttons and display of the scanner's operating panel.
Details the types, sizes, and paper weights of documents that can be scanned.
Instructions for loading multiple documents into the scanner for scanning.
Instructions for scanning passports using a carrier sheet.
How to scan documents larger than A4 by folding them.
How to use carrier sheets to protect documents during scanning.
Regular cleaning procedures to maintain scanner performance and image quality.
Information on consumable parts like feed and retard rollers.
Recommended solutions for common problems encountered with the scanner.
Detailed technical specifications of the scanner.
General| Film scanning | - |
|---|---|
| Color scanning | Yes |
| Grayscale levels | 256 |
| Background colors | White |
| Input color depth | 24 bit |
| Maximum scan size | 216 x 356 mm |
| ADF scan speed (b/w, A4) | 60 ppm |
| Optical scanning resolution | 600 x 600 DPI |
| Duplex ADF scan speed (b/w, A4) | 120 ipm |
| Display | LCD |
| Scanner type | ADF scanner |
| Product color | Black |
| Sensor type | CMOS CIS |
| Scan drivers | ICA, TWAIN |
| Daily duty cycle (max) | 7500 pages |
| Standard input capacity | 80 sheets |
| Maximum scan width | 216 mm |
| Maximum scan length | 5588 mm |
| Media thickness (min) | 0.04 mm |
| Scanning media types supported | Business Card, Plastic Card |
| Maximum ISO A-series paper size | A4 |
| USB version | 3.2 Gen 2 (3.1 Gen 2) |
| Standard interfaces | USB 3.2 Gen 1 (3.1 Gen 1) |
| Input voltage | 100 V |
| Power supply type | AC |
| AC input frequency | 50 - 60 Hz |
| Power consumption (standby) | 1.4 W |
| Power consumption (typical) | 23 W |
| Operating temperature (T-T) | 10 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Cables included | USB |
| Server operating systems supported | Windows Server 2008, Windows Server 2008 R2, Windows Server 2008 R2 x64, Windows Server 2008 x64, Windows Server 2012, Windows Server 2012 R2, Windows Server 2012 R2 x64, Windows Server 2012 x64 |
| Windows operating systems supported | Windows 10, Windows 10 Education, Windows 10 Education x64, Windows 10 Enterprise, Windows 10 Enterprise x64, Windows 10 Home, Windows 10 Home x64, Windows 10 IOT Core, Windows 10 Pro, Windows 10 Pro x64, Windows 7, Windows 7 Enterprise, Windows 7 Enterprise x64, Windows 7 Home Basic, Windows 7 Home Basic x64, Windows 7 Home Premium, Windows 7 Home Premium x64, Windows 7 Professional, Windows 7 Professional x64, Windows 7 Starter, Windows 7 Starter x64, Windows 7 Ultimate, Windows 7 Ultimate x64, Windows 7 x64, Windows 8.1, Windows 8.1 Enterprise, Windows 8.1 Enterprise x64, Windows 8.1 Pro, Windows 8.1 Pro x64, Windows 8.1 x64 |
| Scan media weight | 27 - 413 g/m² |
Weight and Dimensions| Depth | 254 mm |
|---|---|
| Width | 285 mm |
| Height | 231 mm |
| Weight | 3400 g |
To Next Page