Canon MV430i User Manual

Using the LCD Screen
Slide the LCD panel OPEN button and
open the panel by pulling it away from
the camcorder. This automatically
switches the LCD screen on and the
viewfinder off. When you close the
LCD panel, press the upper corner
until it clicks closed. The LCD screen
automatically switches off and the
viewfinder switches back on.
Opening and closing the LCD screen
Changing the angle of the LCD screen
You can choose the angle of the screen
that suits you best by opening and
rotating the screen, also you can rotate
the LCD screen so that faces in the
direction of the lens (DQ 25).
You can also push the panel flat
against the camcorder until it is flush
with the side, with the screen facing
outwards.
E Notes:
• Avoid touching the LCD screen when moving the LCD panel.
• Do not hold the camcorder by the LCD panel or the viewfinder.
• Make sure you open the LCD panel at 90°. before attempting to rotate it.
23
Mastering
the
Basics

Canon MV430i Specifications

General

Brand	Canon
Model	MV430i
Category	Camcorder
Language	English