Canon Oce TDS320 User Manual

Configure the Océ TDS/TCS system (except TDS7x0) for use with
Océ Remote Logic
NOTE
The procedures below only apply for Océ TDS/TCS systems equipped with a Graphical User
Interface.
Illustration
[1] Océ TDS/TCS system (except TDS7x0) configuration or use with Océ Remote Logic
Procedure
1.
From the Océ Settings Editor application on the printer controller, click ‘Edit’ and ‘Options’.
The ‘Options’ window opens.
2.
Check the ‘Host name’ field:
If the ‘Host name’ field Then
is empty or 'Auto detected' the configuration of the Océ TDS/TCS system is correct for use
with Océ Remote Logic.
is not empty or 'Auto de-
tected'
1. Open the drop down list.
2. Select the empty line or 'Auto detected'.
3. Click 'OK'.
4. Restart the Océ TDS/TCS printer controller.
Configure the Océ TDS/TCS system (except TDS7x0) for use with Océ Remote Logic
Chapter 2 - Configure the print system controller
43
Océ TDS/TCS/TC Connectivity information for Windows environments

Canon Oce TDS320 Specifications

General

Brand	Canon
Model	Oce TDS320
Category	Printer
Language	English