Canon Pixma E4570 User Manual

在 Windows 以無線方式安裝及連接 PIXMA E4570 打印機 （以 Windows 10 作示範）
Installing PIXMA E4570 on Windows via WiFi connection (Use Windows 10 as example)
無線設定 Wireless Setup
1. 按設定按鈕(A)
Press the Setup button (A).
2. 使用 或 按鈕(B)選擇 Wi-Fi 設定並按 OK 按鈕。
Use the or button (B) to select Wi-Fi setup and press the OK button
3. 選擇手動連接並按 OK 按鈕。
Select Manual connect and press the OK button
4. 選擇無線路由器並按 OK 按鈕。
Select your wireless router and press the OK button
如果顯示其他螢幕或未找到無線路由器，請參見「疑難排解」。
If a different screen appears or no wireless router is found, see "Troubleshooting."

Canon Pixma E4570 Specifications

General

Printer Type	All-in-One
Functions	Print, Copy, Scan, Fax
Print Technology	Inkjet
Print Resolution	4800 x 1200 dpi
Scanner Type	Flatbed
Scan Resolution	600 x 1200 dpi
Automatic Document Feeder	Yes
Duplex Printing	Manual
Ink Cartridge Compatibility	PG-47, CL-57
Dimensions	435 x 295 x 189 mm
Print Speed (Color)	4.0 ipm
Connectivity	USB, Wi-Fi
Paper Sizes	A4, Letter, Legal, Envelopes
Mobile Printing	Apple AirPrint, Mopria
Display	1.5-inch LCD
Paper Handling	Rear Tray

Summary

Wireless Setup

Initiate Wireless Configuration

Press the Setup button (A) and select Wi-Fi setup.

Select Network and Connect

Choose Manual connect, select your wireless router, and press OK.

Enter Wi-Fi Password

Input the Wi-Fi password, noting case sensitivity, and confirm the entry.

Finalize Connection

Confirm connection on screen and press the COPY button (A) to complete setup.

Driver Download and Installation

Download Printer Driver

Go to the Canon website and download the printer driver file.

Run Driver Installer

Execute the downloaded driver file and click 'Next' to begin installation.

Configure Installation Settings

Select region and accept the license agreement to proceed with installation.

Select Printer and Install

Choose the Wi-Fi printer, click Next, and wait for the driver installation.

Complete Driver Setup

Click Finish to complete the driver installation process.