Canon PIXMA G620 User Manual

What Is ScanGear (Scanner Driver)?
ScanGear (scanner driver) is software required for scanning documents.
Use the software to specify the
output size, image corrections, and other settings.
ScanGear can be started from IJ Scan Utility or applications that are compatible with the standard TWAIN
interface. (ScanGear is a TWAIN-compatible driver.)
Features
Specify the document type, output size, and other settings when scanning documents and preview scan
results. Make various correction settings or finely adjust the brightness, contrast, and other parameters to
scan in a specific color tone.
Screens
There are two modes: Basic Mode and Advanced Mode.
Switch modes with the tabs on the upper right of the screen.
Note
• ScanGear starts in the last used mode.
• Settings are not retained when you switch modes.
Basic Mode
Use the Basic Mode
tab to scan easily by following three simple on-screen steps (
, , and
).
290

Canon PIXMA G620 Specifications

General

Print Technology	Inkjet
Number of Ink Bottles	6
Maximum Print Resolution	4800 x 1200 dpi
Borderless Printing	Yes
Functions	Print, Scan, Copy
Scanner Type	Flatbed
Scanner Resolution	600 x 1200 dpi
Display	2-Line LCD
Ink Type	Dye-based
Print Speed (Black)	3.9 ipm
Print Speed (Color)	3.9 ipm
Paper Sizes Supported	A4, A5, B5, Letter, Legal, Envelopes
Paper Capacity (Input)	100 sheets (Plain Paper)
Connectivity	USB, Wi-Fi
Mobile Printing	Apple AirPrint, Mopria, Canon PRINT app
Ink Bottles	Black, Cyan, Magenta, Yellow
Dimensions	445 x 340 x 167 mm