Switching Printer's Connection to Network or Terminal Devices
Check the following items when connecting a newly added computer to the LAN environment to the
printer,
changing the connection method from USB to LAN, or changing the wireless LAN (Wi-Fi) connection
method.
Connects to Another Computer via LAN/Changes from USB to LAN Connection
Switching LAN Connection Method
Reconfiguration Method of Wi-Fi Connection
Connects to Another Computer via LAN/Changes from USB to LAN
Connection
To connect an additional computer to the printer via LAN, or to change from USB to LAN connection, click
here and perform setup.
Switching LAN Connection Method
If you want to switch the connection method to USB when the printer is used with a LAN connection,
check the following item.
• For Windows:•
â—¦ Click here and perform setup.
• For macOS:•
â—¦ Click here and perform setup.
Reconfiguration Method of Wi-Fi Connection
Follow either procedure below to change Wi-Fi connection method (infrastructure or Wireless Direct).
• For Windows:•
â—¦ See Changing the Connection Mode.
â—¦ Perform settings on the Network Settings screen on IJ Network Device Setup Utility.â—¦
Important
• Before you perform settings using IJ Network Device Setup Utility, turn on Easy WL connect•
mode on the printer following the procedure below.
1. Check that printer is turned on.1.
2. Press and hold (Wireless connect) button for 3 seconds.2.
LCD and Operation Panel
3. Perform operations following instructions on your computer, smartphone/3.
tablet.
47
To Next Page
Loading...
Need help?
General
