Connecting with Wireless Direct
You can connect devices (e.g. computer, smartphone, or tablet) to the
printer by two methods below.
• Wireless connection (connecting devices via a wireless router)•
• Direct wireless connection (connecting devices directly without a wireless router)•
This section describes Wireless Direct, which allows you to print by connecting the devices to the printer
directly.
Follow the procedure below to set up and use Wireless Direct.
1. Preparing the printer.1.
Changing Printer Setting to Use Wireless Direct
2. Preparing a device to connect to the printer.2.
Connecting a smartphone/tablet/computer to the printer
Important
• You can connect up to 5 devices to the printer at the same time with Wireless Direct.•
• Check the usage restrictions and switch the printer to the Wireless Direct.•
Restrictions
Changing Printer Setting to Use Wireless Direct
1. Make sure the printer is turned on.1.
2. Press Setup button.2.
The Setup menu screen appears.
3. Select Device settings and press the OK button.3.
4. Select LAN settings and press the OK
button.4.
5. Select Wireless Direct and press the OK button.5.
6. Select Switch WL Direct and press the OK button.6.
7. Check displayed message, select Yes and press the OK button.7.
The Wireless Direct is enabled and a device can be connected to the printer wirelessly.
Note
• After completing the settings, you can check the Network name(SSID), Security protocol, and•
WL Direct net.(SSID) by displaying them.
36
To Next Page
Loading...
Need help?
General
