FINE Cartridge Holder Does Not Move to the Position for Replacing
Check1
Is the POWER lamp off?
Check if the POWER lamp is lit.
The FINE cartridge holder will not move unless the power is on. If the POWER lamp is off, close the cover and
turn the printer on.
While the POWER lamp is flashing, the printer is initializing. Wait until the POWER lamp stops flashing and
remains lit, and then open the cover again.
Check2
Is the Alarm lamp flashing?
Close the cover, confirm the number of times the Alarm lamp is flashing, take the appropriate action to resolve
the error, and then reopen it. For details on how to resolve the error, see If an Error Occurs.
Check3
Has the cover been left open for 10 minutes or longer?
If the cover is left open for more than 10 minutes, the FINE cartridge holder moves to the position to protect it to
prevent the print head from drying out. Close and reopen the cover to return the FINE cartridge holder to the
position for replacing.
Check4
Has the printer been printing continuously for a long period?
If the printer has been printing continuously for a long time, the FINE cartridge holder may not move to the
position for replacing since the print head may overheat.
Note
• Do not open the cover while printing is in progress; otherwise, an error occurs
267
To Next Page
Loading...
Need help?
General
Weight and Dimensions
