Canon PIXMA iP6700D - User Manual

Other manuals for Canon PIXMA iP6700D

Direct Printing Guide54 pages

Easy Setup Instructions2 pages

Specifications2 pages

Questions and Answers

C
Cynthia EstradaAug 17, 2025
What to do if an unintended language is displayed on the Canon PIXMA iP6700D Printer LCD?
- D
  dianawilsonAug 17, 2025
  If your Canon Printer LCD displays the wrong language, follow these steps to change it: 1. Press the Menu button. 2. Press the button to select and then press the OK button. 3. Press the button to select and then press the OK button. 4. Press the button three times and then press the OK button. If the Bluetooth unit is attached to the printer, press the button four times and then press the OK button. 5. Press the button to select a language. 6. Press the OK button. The language selected is displayed on the LCD.
K
Kristen SchmidtAug 22, 2025
How to fix display on LCD if I cannot see it properly on Canon PIXMA iP6700D?
- C
  Chelsea WarrenAug 22, 2025
  If you're having trouble seeing the display on your Canon Printer's LCD, here are a couple of things to try: * If the display on the LCD is illegible, adjust the contrast of the LCD in the Adjust contrast menu in the Maintenance/settings. * If the LCD may be in the sleep mode, press the OK button to turn on the LCD again.
F
ftorresOct 28, 2025
What to do if my Canon PIXMA iP6700D ink does not come out / printing is blurred / colors are wrong / white streaks?
- Z
  zrobertsOct 29, 2025
  If your Canon Printer exhibits issues like ink not coming out, blurred prints, wrong colors, or white streaks, here's what you can do: * If the ink tank lamp is flashing, the ink is empty. Replace the ink tank and close the cover. If printing is not finished yet, just press the OK button on the printer to continue printing in the “no ink” state. Replace the ink tank as soon as possible after printing finishes. Continuing to print in the “no ink” state may cause damage to the printer. * Ensure the correct ink tank color is inserted in each position by opening the cover and verifying all ink tank lamps are lit. * Open the cover, paper output tray and inner cover, and then press on the mark on the ink tank whose lamp is off until the ink tank clicks into place. * Confirm that the Med...
W
wjonesNov 3, 2025
What to do if I see an error message is displayed on the Canon PIXMA iP6700D LCD?
- J
  Jasmine NelsonNov 3, 2025
  If you see an error message on your Canon Printer's LCD, here are potential causes and solutions: * If there are no photos in the memory card, ensure photo data edited on the computer is printed from the computer, not the camera. Check for proper data in the memory card. * If the ink has run out (The lamp on the ink tank flashes), replace the ink tank and close the cover. If printing is in progress and you want to continue printing, press the OK button with the ink tank installed. Then printing can continue under the ink out condition. Replace the empty ink tank immediately after the printing. The printer may be damaged if printing is continued under the ink out condition. If multiple ink tank lamps are flashing red, check how fast they flash. Fast flashing (at about one second interv...
S
sarahturnerNov 9, 2025
Why is the back of the paper smudged / paper does not feed properly / printed surface is scratched on my Canon PIXMA iP6700D Printer?
- T
  Thomas GibbsNov 9, 2025
  Here's what could be causing smudges, feed issues, or scratches on your Canon Printer: * If the inside of the printer is dirty, clean it by following these steps: 1. Ensure the printer is on and no paper is loaded. 2. Place A4/Letter-sized plain paper in landscape and fold it in half horizontally. 3. Unfold the paper and load it with the inverted V-edge down. 4. Press the Menu button. 5. Select Maintenance/settings and press OK. 6. Select Maintenance and press OK. 7. Select Bottom plate cleaning and press OK. 8. Select Yes and press OK. Wipe ink off any stained protrusions inside the printer using a swab, after turning off the printer. * If the paper feed roller is dirty, clean the paper feed rollers. * If a large quantity of plain paper is lo...

Summary

Introduction

Preparing the Printer

Installing the Print Head

Installing the Ink Tanks

Aligning the Print Head

Installing the Printer Driver

Installing the Printer Driver - Windows

Step-by-step guide for installing printer drivers on Windows operating systems.

Installing the Printer Driver - Macintosh

Step-by-step guide for installing printer drivers on Mac OS X.

Basic Operations

Printing with Windows

Instructions for printing documents from Windows applications.

Printing with Macintosh

Instructions for printing documents from Macintosh applications.

Replacing an Ink Tank

Canon PIXMA iP6700D Specifications

General

Print Technology	Inkjet
Max Resolution	9600 x 2400 dpi
Print Speed (Black)	30 ppm
Connectivity	USB 2.0
Number of Ink Cartridges	6
Ink Droplet Size	1 picoliter
Input Paper Capacity	150 sheets
Output Paper Capacity	50 sheets
Borderless Printing	Yes
Media Sizes Supported	Letter, Legal, 4"x6", 5"x7", 8"x10"
Ink Type	Dye-based
Memory Card Support	CompactFlash, Memory Stick, SD, MMC, xD-Picture Card
Operating System Compatibility	Windows, Mac OS
Print Speed (Color)	Up to 17 ppm
Ink Cartridge Compatibility	CLI-8 (Cyan, Magenta, Yellow, Black, Photo Cyan, Photo Magenta)