Canon PIXMA MG8220 Series User Manual

1
XXXXXXXX ©CANON INC.2011
5
(M/BK/GY/PGBK/C/Y)
1
3
4
2
1
3
3
1
2
2
series
Retire la cinta (tape).
Compruebe que se le han suministrado los siguientes elementos.
Adaptador de disco
de 8 cm (3,15 pulg.)
(3.15 inches (8 cm)
disc adapter)
Cable de alimentación
Depósitos de tinta
(Ink tanks)
Bandeja de disco
(Disc tray)
CD-ROM de instalación
(Setup CD-ROM)
Manuales y otros documentos
Papel Fotográfico Mate (Matte Photo Paper)
MP-101 (para la Alineación de los cabezales
de impresión automática)
Conexión de red:
prepare el cable Ethernet
o los dispositivos de red,
como el router o el punto de
acceso, según convenga.
Conexión USB:
es necesario un cable USB
(no suministrado).
Evite que caigan objetos dentro del equipo. Podrían provocar fallos en el funcionamiento.
La bandeja de salida del papel (Paper Output Tray) se abre automáticamente al comenzar la
impresión. Mantenga la parte frontal de la bandeja libre de obstáculos.
•
•
No conecte aún el cable USB
o Ethernet.
Conecte el cable de alimentación.
55
Abra la bandeja de salida del papel
(Paper Output Tray).
11
Levante la cubierta/unidad de escaneado (Scanning Unit / Cover) y, a continuación, retire la cinta
naranja (orange tape) y el material de protección (protective material).
La cubierta de documentos (Document Cover) debe estar cerrada para levantar la cubierta/unidad de escaneado
(Scanning Unit / Cover).
33
Cierre la cubierta/unidad de
escaneado (Scanning Unit / Cover).
44
Preparativos
Elementos
suministrados
Abra la cubierta de documentos
(Document Cover), desbloquee
el escáner y, a continuación,
cierre la cubierta de documentos
(Document Cover).
22
ESPAÑOL
Guía de inicio
Léame en primer lugar
Consérvelo a mano para utilizarlo
como referencia en el futuro.
Para llevar a cabo la instalación, coloque el equipo cerca del
punto de acceso (LAN inalámbrica) y del ordenador.
Windows es una marca comercial o una marca comercial registrada de Microsoft
Corporation en EE. UU. y/u otros países.
Windows Vista es una marca comercial o una marca comercial registrada de Microsoft
Corporation en EE. UU. y/u otros países.
Macintosh, Mac, Mac OS, AirPort y Bonjour son marcas registradas de Apple Inc.,
registradas en EE. UU. y/u otros países.
•
•
•
Número de modelo: K10370 (MG8220)
Equipo multifunción fotográfico Canon Inkjet
Solicitar ayuda a Canon
Correo electrónico del servicio técnico:
www.usa.canon.com/support
Teléfono gratuito del servicio técnico:
1-800-OK-CANON
Este servicio ofrece asistencia técnica telefónica gratuita, de lunes
a viernes (excepto festivos), durante el período de garantía.
El soporte mediante dispositivo telefónico para deficientes
auditivos (TDD) está disponible en el 1-866-251-3752.
Remove the tape.
Check the included items.
3.15 inches (8 cm) disc
adapter
Network connection:
Prepare the Ethernet cable
or network devices such as a
router or an access point as
necessary.
USB connection: A USB
cable (not included) is
required.
Manuals and other documents
Power cord
Ink tanks
Setup CD-ROM
Matte Photo Paper MP-101 (for Automatic
Print Head Alignment)
Disc tray
Do not allow objects to fall inside the machine. These could cause malfunction.
The Paper Output Tray opens automatically as printing starts. Keep the front of the tray clear of any
obstacles.
•
•
Do not connect the USB or Ethernet
cable yet.
Connect the power cord.
55
Open the Paper Output Tray.
11
Lift the Scanning Unit / Cover, then remove the orange tape and protective material.
Document Cover must be closed to lift Scanning Unit / Cover!
33
Close the Scanning Unit / Cover.
44
Preparation
Included Items
Open the Document Cover,
unlock the scanner, then close the
Document Cover.
22
Getting Started
Read me first!
Keep me handy for future reference.
Windows is a trademark or registered trademark of Microsoft Corporation in the U.S.
and/or other countries.
Windows Vista is a trademark or registered trademark of Microsoft Corporation in the
U.S. and/or other countries.
Macintosh, Mac, Mac OS, AirPort and Bonjour are trademarks of Apple Inc., registered
in the U.S. and other countries.
•
•
•
Model Number: K10370 (MG8220)
To perform setup, place the machine near the access point
(wireless LAN) and computer.
ENGLISH
Canon Inkjet Photo All-In-One
Getting Help from Canon
Email Tech Support — www.usa.canon.com/support
Toll-Free Tech Support— 1-800-OK-CANON
This option provides live telephone technical support, free of
service charges, Monday-Friday (excluding holidays), during the
warranty period.
Telephone Device for the Deaf (TDD) support is available at
1-866-251-3752.
QT5-4051-V01
PRINTED IN XXXXXXXX

Canon PIXMA MG8220 Series Specifications

General

Brand	Canon
Model	PIXMA MG8220 Series
Category	All in One Printer
Language	English

Summary

Canon PIXMA MG8220 Series Getting Started Guide

Getting Help from Canon

Contact Canon for technical support via email, toll-free phone, or TDD.

Setup Location Requirements

Place the printer near the wireless LAN access point and computer for initial setup.

Included Items

Check the list of items included in the package with the printer.

Initial Preparation Steps

Remove tape and prepare the printer before proceeding with the setup.

Open Paper Output Tray

Open the paper output tray to prepare for printing and paper feeding.

Open and Unlock Scanner

Open document cover, unlock scanner, and close cover for access.

Remove Protective Materials

Lift scanning unit/cover and remove orange tape and protective material.

Close Scanning Unit/Cover

Close the scanning unit and cover after removing internal protective items.

Connect Power Cord

Connect the power cord; avoid connecting USB or Ethernet cables at this stage.

Ink Tank Installation and Initial Setup

Power On and Adjust LCD

Adjust LCD angle and press the ON button to power on the printer.

Select Language

Select the desired language and confirm with the OK button.

Confirm Initial Screen

When the initial screen appears, touch the OK button to proceed.

Ink Tank Installation

Install ink tanks by inserting them into the corresponding color slots until the lamp lights up.

Check Indicator Lamps

Verify that all ink tank indicator lamps are lit after installation.

Complete Cleaning Cycle

Wait for approximately 4 minutes for the print head cleaning cycle to complete.

Compatible Ink Tanks

List of compatible ink tank models and their order numbers.

Print Head Alignment Procedure

Perform Print Head Alignment

Align the print head using the supplied MP-101 paper in the rear tray.

Prepare Rear Tray for Alignment

Open rear tray, extend output tray extension, and adjust paper guides.

Load Alignment Paper

Load MP-101 paper in the rear tray and adjust guides to fit the paper width.

Start Alignment Process

When prompted, touch the OK button to start the print head alignment process.

Alignment Completion

The blue-black pattern is printed, indicating that print head alignment is complete.

Printer Configuration and Software Installation

Setting Plain Paper

Configure the printer for plain paper by loading it into the cassette.

Load Plain Paper in Cassette

Load plain paper into the cassette and adjust paper guides for proper feeding.

Confirm Paper Settings

Touch the OK button to confirm the paper settings for plain paper printing.

Install Software from CD-ROM

Install the printer software and drivers using the Setup CD-ROM on your computer.

Connect USB Cable During Install

Connect the USB cable to the computer when prompted by the installation software.

Read On-screen Manual

Install and refer to the On-screen Manual for detailed functions and troubleshooting.