EasyManua.ls Logo

Canon PIXMA MG8250 User Manual

Canon PIXMA MG8250
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
2
©CANON INC.2011
2
3
1
(B)(A)
1
2
5
6
8
1
2
3
5
6
(M/BK/GY/PGBK/C/Y)
1
2
3
2
1
2
2
1
3
4
4
1
2
1
3
2
1
3
7
3
1
2
2
Uklonite traku.
Provjerite isporučene stavke.
Adapter za disk od
3,15 inča (8 cm)
Kabel napajanja
Posude s tintom
Ladica za disk
[Setup CD-ROM/CD-
ROM za postavljanje]
Priručnici i drugi dokumenti [Matte Photo Paper/Mat fotopapir] MP-101
(za automatsko poravnavanje ispisne glave)
Mrežna veza: Po potrebi
pripremite Ethernet kabel ili
mrežne uređaje kao što su
usmjerivač i pristupna točka.
USB veza: Potreban je USB
kabel (nije u kompletu).
Pazite da nikakav predmet ne upadne u uređaj. To bi moglo uzrokovati kvar.
Ladica za izlaz papira automatski će se otvoriti kada ispis započne. Pazite da ispred ladice ne bude
nikakvih prepreka.
Nemojte još priključivati USB ili
Ethernet kabel.
Priključite kabel napajanja.
Prilagodite kut LCD zaslona,
a zatim pritisnite gumb [ON]
(Uključi).
Kada se prikaže zaslon 1, dodirnite
gumb [OK] (U redu).
8
Podignite jedinicu za skeniranje / poklopac.
1
Zakrenite i uklonite narančasti poklopac.
(A) Nemojte pritiskati strane dok je žlijeb oblika L blokiran.
(B) Nemojte dodirivati!
3
Umetnite posudu s tintom u utor odgovarajuće boje i gurnite je prema dolje.
Provjerite svijetli li lampica za tintu, a zatim umetnite sljedeću posudu s tintom.
4
Provjerite svijetle li sve lampice.
5
Ako se prikaže poruka o
pogrešci, provjerite je li
posuda s tintom pravilno
umetnuta.
Spustite jedinicu za skeniranje /
poklopac.
Pričekajte otprilike 4 minute da ovaj
zaslon nestane, a zatim nastavite.
6
Sljedeći su spremnici s tintom kompatibilni s ovim uređajem.
Ovdje se umeću posude s tintom.
Nemojte ih dodirivati dok se ne zaustave.
Početak
Najprije pročitajte mene!
Držite me pri ruci za buduće potrebe.
Windows je zaštitni znak ili registrirani
zaštitni znak tvrtke Microsoft Corporation
u SAD-u i/ili drugim državama.
Windows Vista je zaštitni znak ili
registrirani zaštitni znak tvrtke Microsoft
Corporation u SAD-u i/ili drugim
državama.
Macintosh, Mac, Mac OS, AirPort
i Bonjour su zaštitni znakovi tvrtke
Apple Inc. registrirani u SAD-u i drugim
državama.
Broj modela: K10370 (MG8250)
Kako biste postavili pisač, smjestite ga blizu pristupne točke
(bežični LAN) i računala.
HRVATSKI
Odaberite jezik, a zatim dodirnite
gumb [OK] (U redu).
7
Kako biste promijenili postavku jezika,
dodirnite gumb Povratak.
Otvorite ladicu za izlaz papira.
Podignite jedinicu za skeniranje / poklopac, zatim uklonite narančastu traku i zaštitni materijal.
Poklopac za dokumente mora biti spušten kako bi se jedinica za skeniranje / poklopac mogao podići!
3
Spustite jedinicu za skeniranje /
poklopac.
Priprema
Isporučene
stavke
Zamjena
posuda
s tintom
Gumb Povratak
Potpuno uklonite narančastu traku.
Uklonite zaštitni omot.
2
Otvorite poklopac za dokumente,
otključajte skener, a zatim zatvorite
poklopac za dokumente.
Remove the tape.
Check the included items.
3.15 inches (8 cm) disc
adapter
Network connection:
Prepare the Ethernet cable
or network devices such as a
router or an access point as
necessary.
USB connection: A USB
cable (not included) is
required.
Manuals and other documents
Power cord
Ink tanks
Setup CD-ROM
Matte Photo Paper MP-101 (for Automatic
Print Head Alignment)
Disc tray
Do not allow objects to fall inside the machine. These could cause malfunction.
The Paper Output Tray opens automatically as printing starts. Keep the front of the tray clear of any
obstacles.
Do not connect the USB or Ethernet
cable yet.
Connect the power cord.
Adjust the angle of the LCD, then
press the ON button.
6
Open the Scanning Unit / Cover.
1
Twist and remove the orange cap.
(A) Do not press the sides when the L-shaped groove is blocked.
(B) Do not touch!
3
Insert and push down the ink tank into the matching color slot.
Check that the ink lamp is lit, then install the next ink tank.
4
Check that all lamps are lit.
5
If an error message
appears, check that
the ink tank is installed
correctly.
Close the Scanning Unit / Cover.
Wait for about 4 minutes until this screen
disappears, then proceed.
6
The following ink tanks are compatible with this machine.
When screen 1 is displayed, touch
the OK button.
8
Remove the orange tape completely.
Remove the protective wrap.
2
This is where the ink tanks are to be installed.
Do not touch it until it stops.
Getting Started
Read me first!
Keep me handy for future reference.
Windows is a trademark or registered
trademark of Microsoft Corporation in the
U.S. and/or other countries.
Windows Vista is a trademark or
registered trademark of Microsoft
Corporation in the U.S. and/or other
countries.
Macintosh, Mac, Mac OS, AirPort
and Bonjour are trademarks of Apple
Inc., registered in the U.S. and other
countries.
Model Number: K10370 (MG8250)
To perform setup, place the machine near the access point
(wireless LAN) and computer.
ENGLISH
Select your language, then touch
the OK button.
7
To change the language setting, touch
the Back button.
Open the Paper Output Tray.
Lift the Scanning Unit / Cover, then remove the orange tape and protective material.
Document Cover must be closed to lift Scanning Unit / Cover!
3
Close the Scanning Unit / Cover.
Preparation
Included Items
Replacing the
Ink Tanks
Back button
Open the Document Cover,
unlock the scanner, then close the
Document Cover.
M: CLI-526M
GY: CLI-526GY
C: CLI-526C
BK: CLI-526BK
PGBK: PGI-525PGBK
Y: CLI-526Y
Question and Answer IconNeed help?

Do you have a question about the Canon PIXMA MG8250 and is the answer not in the manual?

Canon PIXMA MG8250 Specifications

General IconGeneral
Print TechnologyInkjet
Maximum Resolution9600 x 2400 dpi
Scanner Optical Resolution4800 x 4800 dpi
Card ReaderYes
Direct Disc PrintingYes
Number of Ink Tanks6
Paper Input Capacity150 sheets
Scanner TypeFlatbed
Media TypesPlain paper, photo paper, Envelopes
Paper SizesA4, A5, B5, Letter, Legal, Envelopes
ConnectivityUSB, WiFi
Weight10.7 kg
CartridgesPGI-525PGBK, CLI-526BK, CLI-526C, CLI-526M, CLI-526Y, CLI-526GY
Print Speed (Black)Approx. 12.5 ipm
Print Speed (Color)Approx. 9.3 ipm

Summary

Read Me First! Safety and Setup Guidance

Initial Printer Setup Steps

Sequential instructions for opening trays, removing protective materials, and connecting power.

Power On and Initial Configuration

Guide to powering on the printer, adjusting the LCD, and selecting the language.

Included Items Verification

Checking supplied accessories like ink tanks, power cord, and setup media.

Connection and Preparation Notes

Guidance on network/USB connections and general preparation for setup.

Ink Tank Compatibility

Information on compatible ink tank models for the PIXMA MG8250.

Perform Print Head Alignment

Load Specialty Paper

Instructions for loading Matte Photo Paper MP-101 into the rear tray.

Adjust Paper Guides

Steps to adjust paper guides to fit the loaded paper width.

Execute Print Head Alignment

Initiating and completing the print head alignment process via the printer's display.

Install Software and Drivers

Prepare for Software Installation

Instructions for closing printer trays and preparing the computer for setup.

Connect USB Cable

Prompt to connect the USB cable to the computer during software installation.

Run Setup from CD-ROM

Guide to inserting the Setup CD-ROM and following on-screen instructions for installation.

Complete Installation and Configuration

Following on-screen prompts to finish software setup for Windows and Macintosh.

Energy Saving Settings and Operation

Energy Saving Functionality

Explanation of the auto power-off function for energy saving.

LCD Display Timeout

Information on the LCD display turning off after inactivity and how to restore it.

Turn Off Printer

Procedure for turning off the printer after use.

Related product manuals