Canon PIXMA MP450 Start Here

1 Unpack the machine.
1 Carefully remove all items from the box.
2 Check the package contents.
• See the flapped lid of the packing box.
3 Place the machine on a flat surface.
4 Remove all shipping tape and the protective sheet.
5 Open the Scanning Unit and remove the protective material (A).
• Be sure to hold the machine by the side. Do not lift the machine by grasping the Paper Support Extension
or the Operation Panel.
2 Connect the power cord.
1 Connect the power cord.
2 Press [ON/OFF] to turn
ON the machine.
3 Use [ ] or [ ] on the Operation Panel to select the language on the LCD,
then press [OK].
• The language setting is only available for some countries.
3 Install the FINE Cartridge.
1 Lift the Scanning Unit and pull the Scanning Unit Support down into place.
IMPORTANT (US only)
• Write down the serial number. You will need this to register the product.
2 Prepare the FINE Cartridges.
3 Insert the FINE Cartridges.
4 Close the Scanning Unit.
• Lift the Scanning Unit to put the Scanning Unit Support back to its original position.
IMPORTANT
Wait until the preparatory operation is complete; this takes about one to two minutes.
4 Load the paper.
1 Open the Paper Support (1) and pull up the Paper Support Extension (2) until
it stops.
2 Load the paper with the print side face up.
• Ensure the paper stack does not exceed the Load Limit Mark (A).
3 Pinch and adjust the Paper Guide (3) to the width of the stack.
4 Open the Paper Output Tray.
The hardware setup is complete.
If you are connecting the machine to a computer for use, see the reverse side for instructions on
installing the software.
Thank you for purchasing the Canon PIXMA MP450. To prepare your machine for use, please follow these
Easy Setup Instructions before referring to any other documentation.
IMPORTANT
Do not connect the USB cable until after the software is installed. See the reverse side of this sheet for
details.
(A)
The cartridge
moves to the left.
Install the FINE
Cartridges here.
Do not touch!
Remove the protective tape.
(2)
(1)
(3)
(A)
© 2005 Canon Inc.
All products and brand names are registered trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
QT7-0008-V02 xx2005A © CANON INC. 2005 PRINTED IN VIETNAM
All manuals and user guides at all-guides.com
all-guides.com

Canon PIXMA MP450 Specifications

General

Print technology	Inkjet
Maximum resolution	4800 x 1200 DPI
Time to first page (black, normal)	2.7 s
Time to first page (color, normal)	3.6 s
Print speed (black, normal quality, A4/US Letter)	22 ppm
Print speed (color, normal quality, A4/US Letter)	17 ppm
Scanner type	Flatbed scanner
Input color depth	48 bit
Optical scanning resolution	1200 x 2400 DPI
Copier resize	- %
Maximum copy resolution	- DPI
Copy speed (black, normal quality, A4)	22 cpm
Copy speed (color, normal quality, A4)	17 cpm
Total input capacity	100 sheets
Total output capacity	- sheets
Total number of input trays	-
Market positioning	Home & office
Internal memory	- MB
Card reader integrated	No
Sound pressure level (printing)	- dB
Maximum print size	216 x 297 mm
Paper tray media types	Glossy paper, Photo paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5
ISO B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
PictBridge	Yes
Dimensions (WxDxH)	444 x 310 x 160 mm
All-in-one functions	Copy, Scan
Color all-in-one functions	copy, print, scan
Compatible operating systems	Windows XP/Me/2000/98
Standard interfaces	Bluetooth, IrDA
USB 2.0 ports quantity	1
Power consumption (average operating)	12 W