EasyManuals Logo

Canon PIXMA MP460 User Manual

Canon PIXMA MP460
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1 Carefully remove all items from the box.
2 Check the package contents.
See the flapped lid of the packing box.
3 Place the machine on a flat surface.
4 Remove all shipping tape and the protective sheet.
5 Open the Scanning Unit and remove the protective material (A).
Be sure to hold the machine by the side. Do not lift the machine by grasping the Paper Support Extension
or the Operation Panel.
1 Connect the power cord.
2 Press [ON/OFF] to turn
ON the machine.
3 Use [ ] or [ ] on the
Operation Panel to select the language on the LCD, then press [OK].
The language setting is only available for some countries.
If you have an undesired language selection, refer to the User’s Guide.
1 Lift the Scanning Unit and pull the Scanning Unit Support down into place.
IMPORTANT (US only)
Write down the serial number. You will need this to register the product.
2 Prepare the FINE Cartridges.
3 Insert the FINE Cartridges.
4 Close the Scanning Unit.
Lift the Scanning Unit to put the Scanning Unit Support back to its original position.
Wait until the preparatory operation is complete; this takes about one to two minutes.
1 Open the Paper Support (1) and pull up the Paper Support Extension (2) until
it stops.
2 Load the paper with the print side face up.
Ensure the paper stack does not exceed the Load Limit Mark (A).
3 Pinch and adjust the Paper Guide (3) to the width of the stack.
4 Open the Paper Output Tray.
The hardware setup is complete.
If you are connecting the machine to a computer for use, see the reverse side for instructions on
installing the software.
Thank you for purchasing the Canon PIXMA MP460. To prepare your machine for use, please follow these
Easy Setup Instructions before referring to any other documentation.
IMPORTANT
Do not connect the USB cable until after the software is installed. See the reverse side of this sheet for
details.
(A)
The cartridge
moves to the left.
Install the FINE
Cartridges here.
Do not touch!
Remove the protective tape.
B
C
(2)
(1)
(3)
(A)
© 2006 Canon Inc.
All products and brand names are registered trademarks or trademarks of their respective owners.
Specifications subject to change without notice.
QT5-0572-V01 xxxxxxx © CANON INC. 2006 PRINTED IN VIETNAM

Other manuals for Canon PIXMA MP460

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Canon PIXMA MP460 and is the answer not in the manual?

Canon PIXMA MP460 Specifications

General IconGeneral
Print TechnologyInkjet
Maximum Print Resolution4800 x 1200 dpi
FunctionsPrint, Copy, Scan
Print Resolution (Black)600 x 600 dpi
Scanner TypeFlatbed
Scanner Resolution1200 x 2400 dpi
ConnectivityUSB 2.0
Paper Capacity100 sheets
Print Speed (Color)17 ppm
Copy Speed (Black)22 cpm
Copy Speed (Color)13 ppm
Copy Resolution600 x 600 dpi
DisplayLCD screen
Supported Media SizesLetter, Legal, Envelopes, 4" x 6"
Ink CartridgesPG-40 (Black), CL-41 (Color)
Print Speed (Black)Approx. 22 ppm
Weight13.2 lbs

Related product manuals