What to do if Canon PIXMA MP510 Printer says ink ran out?
If the Canon Printer displays an error message on the LCD, and the cause is that the ink has run out, replace the ink tank and close the Scanning Unit (Printer Cover). Printing under the current condition may damage the machine.
What does it mean when my Canon PIXMA MP510 Printer says the ink absorber is almost full?
If your Canon Printer displays an error message on the LCD, and the cause is that the ink absorber is almost full, press the OK button to cancel the error so you can continue printing. However, because printing is disabled once the ink absorber becomes completely full and until the ink absorber is replaced, you are recommended to contact a Canon service representative as early as possible.
How to fix Canon PIXMA MP510 Printer not printing because ink tank is empty?
If your Canon Printer is not printing and you suspect the ink tank is empty, open the Scanning Unit (Printer Cover) and check the ink lamps. If an ink lamp is flashing red at about 1-second intervals, the tank is empty. Replace the ink tank, and close the Scanning Unit (Printer Cover).
Why is my Canon PIXMA MP510 Printer not printing, and the ink tank is not installed securely?
If your Canon Printer is not printing and you suspect the ink tank is not installed securely or part of the orange tape is remaining, open the Scanning Unit (Printer Cover) and check the ink lamps. Press the mark on the ink tank until it clicks into place.
What to do if Canon PIXMA MP510 ink may have run out?
If your Canon Printer displays an error message on the LCD, and the cause is that the ink may have run out, replacing the ink tank is recommended. If the lamp on the ink tank is flashing, ink may have run out. Replacing the ink tank is recommended. If printing is in progress and you want to continue printing, press the OK button with the ink tank installed.
What to do if Canon PIXMA MP510 Printer cannot correctly detect ink level?
If your Canon Printer displays an error message on the LCD, and the cause is that the remaining level of the ink cannot be correctly detected, replace the ink tank and close the Scanning Unit (Printer Cover). If you want to continue printing in this condition, you need to release the function for detecting the remaining ink level.
What to do if Canon PIXMA MP510 ink tank cannot be recognized?
If your Canon Printer displays an error message on the LCD, and the cause is that the following ink tank cannot be recognized, install an appropriate ink tank.
How to fix Canon Printer not printing because power cord is not connected?
If your Canon Printer is not printing and the power cord is not connected, make sure that the power cord is securely plugged into the Power Connector of the machine.
What to do if Canon PIXMA MP510 Printer scanner is not operating correctly?
If your Canon Printer displays an error message on the LCD because the scanner is not operating correctly, turn off the machine, and unplug the power cord of the machine from the power supply. After a while, plug the power cord of the machine back in, and then turn on the machine.
What to do if Canon PIXMA MP510 Printer ink tank not installed in proper position?
If your Canon Printer is not printing and you suspect the ink tank is not installed in proper position, open the Scanning Unit (Printer Cover) and check the ink lamps. Confirm that the ink tanks are installed in the appropriate positions.
General| Print Technology | Inkjet |
|---|---|
| Max Print Resolution | 4800 x 1200 dpi |
| Scanner Type | Flatbed |
| Scanner Resolution | 1200 x 2400 dpi |
| Connectivity | USB 2.0 |
| Functions | Print, Copy, Scan |
| Paper Capacity | 150 sheets |
| Ink Cartridges | PGI-5BK, CLI-8BK, CLI-8C, CLI-8M, CLI-8Y |
| Weight | 17.6 lbs |
| Copier Speed (Color) | 17 cpm |
| Paper Sizes | Letter, Legal, Envelopes |
| Operating System Compatibility | Windows, Mac OS |
| Print Speed (Color) | 17 ppm |
| Display | LCD |
To Next Page
