Canon PIXMA MP970 User Manual (English)

Questions and Answers:

T
Thomas MarshallAug 17, 2025
Why does an error message appear on the LCD of my Canon PIXMA MP970?
- W
  williamwestAug 18, 2025
  If an error message appears on the LCD of your Canon Printer, it could be due to several reasons. The message might appear because there's no readable image data on the memory card; in this case, ensure your file names and folder paths use only alphanumeric characters. Alternatively, the ink may have run out, requiring you to replace the ink tank, or the print head may not be installed correctly, so reinstall it following the setup sheet instructions. Also, check if the inner cover is open during printing and close it, or if the ink tanks are not in the correct positions, adjust them accordingly.
K
Kirsten LewisAug 20, 2025
Why is my Canon Printer printing does not start?
- S
  Sandy WoodsAug 20, 2025
  If your Canon Printer isn't starting, it could be due to an empty ink tank. Refer to the error messages displayed on the LCD to identify the specific ink error, and then take the necessary steps to resolve it. Another possibility is that the ink tank isn't installed correctly. In this case, open the Scanning Unit (Printer Cover) and check the ink lamps to ensure proper installation.
S
Sherry Alvarado DVMAug 22, 2025
Why Canon Printer paper does not feed properly?
- B
  Brady YoungAug 23, 2025
  If your Canon Printer's paper isn't feeding properly, it might be due to several reasons. First, make sure you're using the appropriate type of paper, avoiding paper that's too thick or curled. Secondly, a dirty Paper Feed Roller can cause issues, so try cleaning it. Finally, ensure that the paper is loaded correctly in the machine.
K
Kelly SanfordAug 25, 2025
What to do if Canon PIXMA MP970 Printer the ink absorber is almost full?
- M
  michael94Aug 26, 2025
  If your Canon Printer indicates that the ink absorber is almost full, press OK to continue printing. However, it's recommended to contact a Canon service representative because printing will be disabled once the ink absorber is completely full until it is replaced.
H
Holly AguilarAug 27, 2025
What to do if auto head align has failed on Canon PIXMA MP970 Printer?
- E
  Emma BellAug 28, 2025
  If your Canon Printer's auto head alignment has failed, it could be due to a few reasons. The Print Head nozzles might be clogged; press the OK button to dismiss the error and print a nozzle check pattern to assess the Print Head's condition. Another reason could be that you're using paper that isn't A4 or Letter size in the Rear Tray; load A4/Letter-sized plain paper instead. Lastly, strong light exposure to the Paper Output Slot can cause this issue; adjust the printer's position or your environment to reduce the light.
J
Jessica DavenportAug 30, 2025
How to fix Canon Printer when the remaining level of the following ink cannot be correctly detected?
- R
  Richard Allen PhDAug 30, 2025
  If the remaining ink level cannot be correctly detected on your Canon Printer, replace the ink tank and close the Scanning Unit (Printer Cover). If you wish to continue printing without replacing the ink tank, you will need to release the function for detecting the remaining ink level.
A
Adam AndersonSep 1, 2025
What to do if Canon PIXMA MP970 the following ink tank cannot be recognized?
- J
  James BaldwinSep 1, 2025
  If your Canon Printer displays a message indicating that the following ink tank cannot be recognized, there are a few potential reasons. First, ensure that the ink tank is properly installed. If it is, check whether the ink tank is compatible with your machine and install an appropriate one if necessary. Finally, if an ink tank error has occurred, replacing the ink tank should resolve the issue.
D
Duane WilliamsSep 4, 2025
Why Canon PIXMA MP970 Printer machine moves but ink is not ejected?
- I
  ioconnorSep 4, 2025
  If your Canon Printer is moving but not ejecting ink, it's likely that the Print Head nozzles are clogged. Refer to the section “When Printing Becomes Faint or Colors Are Incorrect” in your manual and perform the necessary maintenance operations.
D
donald75Sep 6, 2025
Why error message appears on a PictBridge compliant device connected to Canon PIXMA MP970?
- E
  edwardsrobertSep 6, 2025
  If you see an error message on a PictBridge compliant device connected to your Canon Printer, it's likely because the printer is currently printing from the computer or is in the process of warming up. Wait until the current job finishes before attempting to print from the PictBridge device.
S
Stephanie ShortSep 9, 2025
What does it mean when my Canon PIXMA MP970 Printer says to release the scanner lock switch?
- K
  kelly44Sep 9, 2025
  If your Canon Printer displays a message to release the scanner lock switch and turn the power off and back on, it means the Scanner Lock Switch is not released. Slide the Scanner Lock Switch to the release position and press the ON/OFF button to turn the machine off.

Canon PIXMA MP970 Specifications

General

DVD/CD printing	Yes
Print technology	Inkjet
Maximum resolution	9600 x 2400 DPI
Print speed (black, normal quality, A4/US Letter)	30 ppm
Print speed (color, normal quality, A4/US Letter)	22 ppm
Digital sender	No
Number of print cartridges	7
Scanner type	Flatbed scanner
Input color depth	48 bit
Maximum scan area	216 x 297 mm
Optical scanning resolution	4800 x 9600 DPI
Maximum number of copies	99 copies
Copy speed (black, normal quality, A4)	30 cpm
Copy speed (color, normal quality, A4)	22 cpm
Maximum input capacity	150 sheets
Display	TFT
Market positioning	Home & office
Dimensions (WxDxH)	471 x 396 x 214 mm
Power requirements	AC 100-240V, 50/60Hz
Networking features	IEEE802.3u (100BASE-TX), IEEE802.3(10BASE-T), 10/100Mbps
All-in-one functions	Copy, Scan
Standard media sizes	10 x 15cm, 10 x 18cm, 13 x 18cm, 20 x 25cm, Credit Card (54 x 86mm)
Color all-in-one functions	copy, print, scan
Compatible operating systems	Windows Vista / Windows XP SP1, SP2 / Windows 2000 Professional SP2, SP3, SP4 Mac OS X v.10.2.8 - v.10.4
Envelopes sizes	DL
Media weight (tray 1)	64 - 105 g/m²
Paper tray media types	Envelopes, Glossy paper, Photo paper, Plain paper
Non-ISO print media sizes	Legal
ISO A-series sizes (A0...A9)	A4, A5
ISO B-series sizes (B0...B9)	B5
Borderless printing media sizes	A4
Compatible memory cards	Microdrive
Minimum system requirements	CD-ROM / 1024x768
Sound pressure level (printing)	32 dB
Minimum RAM	128 MB
Minimum processor	Pentium II 300 MHz/PowerPC G3
Minimum storage drive space	800 MB
Standard interfaces	USB 2.0
USB 2.0 ports quantity	1
Bundled software	MP Navigator EX, Easy-PhotoPrint EX, ScanSoft OmniPage SE (OCR), ArcSoft PhotoStudio
Power consumption (off)	1 W
Power consumption (standby)	3.6 W
Power consumption (average operating)	22 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	10 - 90 %