EasyManua.ls Logo

Canon PowerShot A4000 IS

Canon PowerShot A4000 IS
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Adjusting Basic Camera Functions
135
The lens is normally retracted for safety about one minute after you press the
1 button in Shooting mode (p. 46). To have the lens retracted immediately
after you press the 1 button, set the retraction timing to [0 sec.].
z Choose [Lens Retract], and then choose [0
sec.].
Adjust the timing of automatic camera and screen deactivation (Auto Power
Down and Display Off, respectively) as needed (p. 46).
Access the [Power Saving] screen.
z Choose [Power Saving], and then press the
m button.
Configure the settings.
z After choosing an item, press the qr buttons
to adjust it as needed.
Lens Retraction Timing
Power-Saving Adjustment
To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
To conserve battery power, you should normally choose [On] for
[Auto Power Down] and [1 min.] or less for [Display Off].
The [Display Off] setting is applied even if you set [Auto Power Down] to [Off].
A4000 IS A3400 IS A2400 IS A2300
A1300 A810

Other manuals for Canon PowerShot A4000 IS

Related product manuals