Adjusting Basic Camera Functions
137
Change the display language as needed.
Access the [Language] screen.
z Choose [Language ], and then press the
m button.
Configure the setting.
z Press the opqr buttons to choose a
language, and then press the m button.
The following setting can also be adjusted on the 3 tab.
• [Video System] (p. 143)
If you accidentally change a setting, you can restore default camera settings.
Access the [Reset All] screen.
z Choose [Reset All], and then press the m
button.
Restore default settings.
z Press the qr buttons to choose [OK], and
then press the m button.
X Default settings are now restored.
Display Language
• You can also access the [Language] screen in Playback mode by pressing and
holding the m button and then pressing the n button.
Adjusting Other Settings
Restoring Defaults
To Next Page
Loading...
