Canon PowerShot SX70 HS User Manual

z Restoring the zoom position is only available in / / / modes.
z With [
Auto: on], the camera does not retain the zoom position from
automatic zooming when the
button is pressed.
z Changing Movie Recording Size
z [ ] and [ ] are only available in mode.
z Subjects appear larger with [
] or [ ] than for other
movie recording sizes.
z If the camera temporarily overheats during extended 4K recording, [
]
is displayed and recording stops. At this time, movie recording will be
unavailable, even if you press the movie recording button. Following
the instructions displayed, either choose a movie recording size other
than [
] or [ ] or turn off the camera to let it cool down
before you resume recording.
z Configuring Sound Recording Settings

Adjusting the Recording Volume
z To restore the original recording volume, choose [Auto] on the recording
screen.
z Configuring Movie Servo AF
z To keep the focus at a specic position, or if you prefer not to record
mechanical sounds from the lens, you can temporarily stop Movie
Servo AF by pressing the
button.
z Using Auto Slow Shutter
z Set to [Disable] when shooting moving subjects under low light, or
when afterimages such as trails may occur.
252

Canon PowerShot SX70 HS Specifications

General

Image Processor	DIGIC 8
Optical Zoom	65x
Aperture	f/3.4 (W) - f/6.5 (T)
Connectivity	Wi-Fi, Bluetooth
Shutter Speed	15 - 1/2000 sec
Built-in Flash	Yes
Sensor	1/2.3-inch CMOS
Focal Length	3.8-247mm (35mm equivalent: 21-1365mm)
Video Resolution	4K UHD at 30p
Viewfinder	0.39-type OLED Electronic Viewfinder
LCD Screen	3.0-inch Vari-angle LCD
Battery	LP-E12
Dimensions	127.1 x 90.9 x 116.6 mm
Weight	Approx. 610g (including battery and memory card)
ISO Sensitivity	ISO 100-3200 (expandable to 6400)
Continuous Shooting	10 fps
Ports	HDMI, USB
Image Stabilization	Yes (Optical)