191
Appendix
Appendices
Replacing the Date Battery
The camera uses a special Date battery to power its
internal clock. If the LCD monitor displays the Set Date/
Time menu when you turn on the camera, this means that
the Date battery has run down and the clock has stopped
running. Please purchase a replacement battery (battery
type CR1220) and install it as follows. (The date battery
is preinstalled at the factory and may therefore expire
earlier than its rated lifespan after the camera has
been purchased.)
Be particularly careful to keep the date batteries out of
the reach of children. Seek medical assistance
immediately if a child swallows a battery since
corrosive battery fluids could damage the stomach or
intestinal wall.
1
Be sure that the camera is turned off.
2
Open the
terminal cover.
3
Pull out the date battery holder.
To Next Page
Loading...
