Saving and Loading Menu Settings
99
Saving and Loading Menu Settings
After you adjust the cinema-look filters and other settings in the FUNC. panel and setup menus, you
can save those settings on a memory card. You can load those settings at a later date or on another
XA25 or XA20 camcorder so that you can use that camcorder in the same way.
Saving Menu Settings to a Memory Card
Menu settings must be saved to memory card 3. If the memory card already has menu settings on it,
they will be overwritten.
1 Insert a memory card into memory card slot 3.
2 Open the [Backup Menu Settings 7] screen.
[FUNC.] > [MENU] > q > [Backup Menu Settings 7]
• Touching [FUNC.] is necessary only when performing the procedure in mode.
3 Touch [Save] and then touch [Yes].
• The current settings are saved to the memory card.
4 Touch [OK] and then touch [X].
Loading Menu Settings from a Memory Card
1 Insert a memory card with menu settings into memory card slot 3.
2 Open the [Backup Menu Settings
7] screen.
[FUNC.] > [MENU] > q > [Backup Menu Settings 7]
• Touching [FUNC.] is necessary only when performing the procedure in mode.
3 Touch [Load] and then touch [Yes].
• After the camcorder’s current settings are replaced with the settings saved on the memory card,
the screen will turn black momentarily and the camcorder will restart.
NOTES
• The camcorder can load settings from other XA25 and XA20 camcorders. After settings are loaded,
settings common to both camcorders are overwritten while settings not common to both are
returned to default values.
Operating modes:
To Next Page
Loading...
Need help?
General
Weight and Dimensions
