To Next Page
N
nathanstewartSep 8, 2025
What to do if Canon XL 2 Camcorder stopped operating to protect the tape?
- WWilliam DouglasSep 8, 2025
If your Canon Camcorder has stopped operating to protect the tape, unload and reload the cassette.
What to do if Canon XL 2 Camcorder stopped operating to protect the tape?
If your Canon Camcorder has stopped operating to protect the tape, unload and reload the cassette.
Why tape is running, but image will not appear on the TV screen on Canon XL 2?
If the tape is running, but the image will not appear on the TV screen when using your Canon Camcorder, clean the video heads.
Why the tally lamp will not light up on Canon XL 2 Camcorder?
If the tally lamp on your Canon Camcorder will not light up, set [TALLY LAMP] to [ON] in the menu.
What to do if Canon XL 2 and wireless controller are not set to the same remote sensor mode?
If your Canon Camcorder and wireless controller are not set to the same remote sensor mode, change the remote sensor modes.
What to do if batteries of the wireless controller are exhausted for Canon XL 2?
If the batteries of the wireless controller for your Canon Camcorder are exhausted, replace the batteries.
Power| power supply | 7.2V DC |
|---|---|
| power consumption | 7.1W |
Camera Sensor| image sensor size | 1/3" |
|---|---|
| image sensor pixels | 680, 000 pixels |
| target area 16:9 pixels | 460, 000 pixels |
Recording| video recording system | DV System |
|---|---|
| audio recording system | PCM digital recording |
| tape speed SP | 0.74 ips |
Display| viewfinder size | 2.0-inch |
|---|---|
| viewfinder pixels | 200, 000 pixels |
| viewfinder configuration | RGB delta |
Operating Environment| operating temperature | 32–104˚ F |
|---|---|
| minimum illumination | 5.5 lx |
| recommended subject illumination | More than 100 lx |
Ports & interfaces| dv terminal | 4-pin connector |
|---|---|
| s-video terminal | 4-pin mini-DIN |
| audio terminal | RCA pin jack |
Weight and Dimensions| dimensions (W x H x D) | 8.9 x 8.7 x 19.5 in. |
|---|---|
| weight (camcorder body only) | 5.3 lbs. |
| total equipped weight | 7.8 lbs. |
Instructions on how to charge the battery pack and use the power adapter.
Guide on how to insert and replace the camcorder's backup battery.
Fundamental steps for starting and stopping video recording.
How to operate the zoom using the lever, ring, or buttons.
Full manual control over shutter speed and aperture settings.
Basic steps for playing back recorded video from a cassette.
Solutions for common issues encountered with the camcorder.
