J
Jennifer BlankenshipAug 12, 2025
What to do if battery pack is damaged on Canon ZR100?
- NNorma GeorgeAug 12, 2025
If the battery pack of your Canon Camcorder is damaged, use a different battery pack.
To Next PageTo Next PageWhat to do if battery pack is damaged on Canon ZR100?
If the battery pack of your Canon Camcorder is damaged, use a different battery pack.
What to do if Canon Camcorder is turned off?
If your Canon Camcorder is turned off, turn the power on.
What to do if Canon ZR100 Camcorder is set to a mode other than CAMERA mode?
If your Canon Camcorder is set to a mode other than the CAMERA mode, set the camcorder to CAMERA mode.
What does 'END' flashing on Canon ZR100 Camcorder mean and how to fix it?
If the tape in your Canon Camcorder has reached the end and “END” is flashing on the screen, rewind the tape or replace the cassette.
What to do if tape reached the end on Canon ZR100?
If the tape of your Canon Camcorder reached the end (“ END” flashes on the screen), rewind the tape.
What to do if Canon ZR100 Camcorder battery packs become hot?
If the battery packs of your Canon Camcorder become hot with use and may not charge, wait until the battery pack temperature is below 40 C (104 F) and retry charging.
What to do if Canon ZR100 Camcorder stopped operating to protect the tape?
If your Canon Camcorder stopped operating to protect the tape, unload and reload the cassette.
How to turn off AV DV on Canon ZR100 Camcorder?
If [AV DV] is set to [ON] on your Canon Camcorder, set [AV DV] to [OFF].
General| Type | MiniDV Camcorder |
|---|---|
| Optical Zoom | 20x |
| Screen Size | 2.5 inches |
| Recording Format | MiniDV |
| Media Format | MiniDV Tape |
| Image Sensor | 1/6" CCD |
| LCD Screen | 2.5 inches |
| Viewfinder | Color |
| Still Image Recording | Yes |
| Focus System | Auto/Manual |
| Image Stabilization | Electronic |
| Microphone | Stereo |
| Speaker | Built-in |
| Interface | IEEE 1394 (FireWire) |
| Battery | Lithium-ion |
