98
E
Using a Memory Card
Selecting the recording image quality
Select the quality of a still image to be recorded.
QUALITY•••••FINE
CARD SET UP
( 37)
To change the image quality to standard, open
the menu and select
CARD SET UP. Then select QUALITY, set it to STANDARD and close the
menu.
Inserting and removing the memory card
MultiMediaCard
MMC-8M
MR
MultiMediaCard
MMC-8M
MR
1. Turn the POWER switch to OFF.
2. Open the memory card compartment cover in the direction of the
arrow.
3. Insert or remove the memory card.
• Push the memory card all the way in.
• Remove the memory card by pushing the card in and letting it spring out.
4. Close the cover.
Notes:
• When you set the camcorder to CARD PLAY (VCR) mode, the last image
recorded appears. If there are no images recorded on the memory card, NO
IMAGES appears in the display.
• Do not touch the memory card terminals.
Do not attempt to pull the memory card out without first pushing it in.
+
,
+
5_ZR30 MC_E(97-119) 3/1/01 11:40 Page 98
To Next Page
Loading...
Need help?
General
