Recording
Movies
on
a
Memory
Card
You
can record Motion JPEG movies with the camcorder, from a tape
in
the camcorder or
from devices connected via the DV terminal or the AV terminal. The sound
of
a movie
recorded on a memory card will be monaural.
I
88
1.
Select the movie size for recording
on
the card: Open the FUNC. menu
and select
(.T)
the movie size icon. Select (
....
~)
a setting option
other than the default
.~
[MOVIE REC OFF] and close the menu.
2.
Press the start/stop button to begin recording.
With
SO
Memory Cards up to 2 GB, you can record until "CARD FULL" appears
(approx. 32 minutes with a 512 MB
SO
Memory Card). With MultiMediaCards, the
recording time is limited to 10 sec.
in
320 x 240 pixels or 30 sec.
in
160 x 120 pixels.
3.
Press the start/stop button to stop recording.
a Do not turn off the camcorder, change the position
of
the TAPE/CARD switch,
disconnect the power source, open the memory card cover or remove the
memory cardwhile the CARD access indicator
is
flashing. Doing so could result
in
data damage.
a When you are using an
SO
Memory Card, make sure that the protect switch is
set to allow recording.
a Do not load/unload a cassette during recording.
a We recommend using a Canon
SO
Memory Card, or an
SO
Memory Card with
a transfer rate
of
more than 2 MB/sec., right after initializing it with this
camcorder. With memory cards not initialized with this camcorder, or when
recording/erasing has been repeatedly performed, the writing speed may be
lower and recording may stop.
a
You
can select the focusing point when recording a movie on the memory card.
a Users
of
Windows XP: When you plan to connect the camcorder to a computer,
keep the length
of
one movie shorter than approx. 12 min.
in
320 x 240 or 35
min.
in
160 x 120.
1.
Play back the tape.
2.
Press the start/stop button when the scene you wish to record
appears.
3.
Press the start/stop button to stop recording.
To Next Page
Loading...
Need help?
General
