3
91
English
Network Info [NWI / WII]
This menu item is used to view all information about the network and related settings. This menu contains and indicates the IP Address [IP]
and the MAC [MAC] Address of the WiFi module, as well as the frequency bands where the WiFi module [BAN](WiFi Band) and the STS
Wireless module[WCH](STS Wireless) is working (transmitting).
Note: In case the BRA 3 / VRA 3 is connected to a TV using the HDMI ARC output, the speaker display shows [NWI]. In case no TV is
connected to the BRA 3 / VRA 3, the display indictaes [WII].
To view the network information, do the following:
1
To enter the menu, press the "M" button.
2
Use the
" " or " "
button
to navigate into the menu
System Info [INF]
and confirm with the "OK" button.
3
Select the menu item Network Info.
4
Press the
"OK" button
and view resp. write down the wanted / required version number(s).
5
To leave the menu, press the"M" button.
Note: The IP address and frequency band of the WiFi module (WiFi band) can only be displayed after the sound bar is connected to your
network via WLAN or network cable.
To Next Page
Loading...
Need help?
General
