Capacity of Texas, Inc.
96
P2793 Gear Shift Direction
Circuit
Yes Ignores PWM input from
shift selector
P2808 Pressure Control Yes DNS, RPR
P2809 Pressure Control Yes DNS, RPR
P2812 Pressure Control
Solenoid 6 (PCS6)
Yes DNS, SOL OFF (hydraulic
default)
P2814 Pressure Control Yes DNS, SOL OFF (hydraulic
P2815 Pressure Control
Solenoid 6 (PCS6)
Yes DNS, SOL OFF (hydraulic
default)
U0001 Hi Speed CAN Bus No Use default values, inhibit
U0010 CAN BUS Reset No Use default values, inhibit
U0100 Lost Communications Yes Use default values
U0103 Lost Communication
With Gear Shift Module
Yes Maintain range selected,
observe gear shift
U0115 Lost Communication Yes Use default values
U0291 Lost Communication
With Gear Shift Module
Yes Maintain range selected,
observe gear shift
U0304 Incompatible Gear Yes Ignore shift selector inputs
U0333 Incompatible Gear Yes Ignore shift selector inputs
U0404 Invalid Data Received
From Gear Shift
Yes Maintain range selected,
observe gear shift
U0592 Invalid Data Received
From Gear Shift
Yes Maintain range selected,
observe gear shift
Table 4-4 Transmission Diagnostic Codes (Cont.)
Code Description
Check
Trans
Light
Description
To Next Page
Loading...
