Capacity TJ5000 DOT - 4-3 REGULAR MAINTENANCE SCHEDULE

Capacity of Texas, Inc.
36
4-3 R EGULAR M AINTENANCE S CHEDULE
4-3.1 G ENERAL
A program of periodic on the job preventive maintenance is
necessary to insure maximum performance and availability of
your Capacity tractor. The Capacity tractor will serve its
owner efficiently throughout a long and active service life if a
few basic inspections and services are regularly performed.
The following suggested preventive maintenance program is
intended as a guide for the maintenance personnel assigned to
this tractor.
See “Engine Oil and Filter Changes” on page 39 for details on
changing the engine oil.
4-3.2 D AILY M AINTENANCE
Never remove cap from hot radiator. Allow radiator to cool.
• Record hourmeter reading
• Check coolant level and add coolant if necessary (use cau-
tion).
• Check transmission oil level and add oil if necessary
(engine running).
• Check engine oil level add oil if necessary (engine
stopped).
• Check power steering oil level and add oil if necessary.
• Check all belts for tension and condition.
• Check hydraulic oil level and add oil if necessary (boom
down).
• Drain water from all air tanks.
• Check tire pressure and condition.
• Check for leaks, broken or damaged parts.
• Apply grease to fifth wheel jaws, locks, cylinders, etc.
• Check lights working and clean.
• Check mirrors clean, tight and unbroken.
• Check fuel/water separator
• Check charge air connection