Capacity of Texas, Inc.
10
Figure 2-1 Controls & Indicators (Cont.)
Due to vertical motion of suspension-type seats the seatbelt
set should be adjusted to allow for adequate head clearance
when the seat is adjusted to the top of upward travel.
SEAT BELTS SHOULD BE WORN AT ALL TIMES TO
AVOID INJURY! ADJUST SEAT POSITION BEFORE
FASTENING SEAT BELT.
Table 2-1 Controls & Indicators (Cont.)
Item Name Function
35 Seat Position Control Lever that is used to adjust front-to-rear
position of the seat
36 Seat Suspension Lock Lever that is used to control the seat
suspension.
37 Seat Back Control
Knob
Knob that can be turned to adjust the tilt of
the seat back.
38 Lumbar Control Switch Switch that controls the adjustment of the
lumbar support
39 Seat Height
Adjustment Switch
Switch that is used to adjust the height of
the seat
40 Seat Belt/Shoulder
Harness (not shown)
See seat belt notes below
To Next Page
Loading...
