setting the time
u With the power off, press and hold the PROGRAM / CLOCK SET button until “12” or “24” Hour blinks in
the display.
v Press the SKIP UP + or SKIP DOWN – button to set the unit to the 24 hour mode or 12 hour mode. Then press
the PROGRAM / CLOCK SET button and the hours will blink.
w Press the SKIP UP + or SKIP DOWN – button to set the current hour. (If you selected 12 hour mode,
be sure to observe the PM indicator to make sure you have set the hour correctly.) Press the PROGRAM /
CLOCK SET button again to conrm and the minute digits will blink.
x Press the SKIP UP + or SKIP DOWN – button to set the current minute. Press the PROGRAM / CLOCK SET
button and the time will be set.
note: The time will appear in the display when the unit is turned off.
adjusting the volume, treble and bass
u
Press the VOLUME UP ( + ) or VOLUME DOWN ( – ) on the remote or on the main unit to increase or decrease
the volume.
v
To MUTE THE MAIN VOLUME: Press the MUTE button on the remote; "MUTE" will appear in the display.
Press this button again or either of the VOLUME UP ( + ) or VOLUME DOWN ( – ) on the remote or on the
main unit to unmute.
w
To ADJUST THE TREBLE: Press the TREBLE ( + ) or ( – ) button on the remote to increase or decrease the treble.
x
To ADJUST THE BASS: Press the BASS ( + ) or ( – ) button on the remote to increase or decrease the bass.
notes: The range for the treble and the bass is –4 to + 4.
When this unit is turned off and back on again, the volume will resume at the level which you set before turning the unit off.
To Next Page
Loading...