Caple C2362 - End Time Operation; Cook Time and End Time Combination

I
nstruction manual
Please keep this instruction manual for future reference
23
End time
- Press selection button repeatedly, until the end time indicator flashes.
- Using the or button, set the required switch-off time.
- After approx. 5 seconds, the display returns to the current time.
- The end time indicator will light up.
- When the time has lapsed, the function indicator will flash, an acoustic signal will
sound for 2 minutes and the oven will switch itself off. Press any button to switch
the signal and the programme off.
Cook time and end time
- Cook time and end time can be used simultaneously, if you want the oven
to be automatically switched on and off at a specific time.
- Using the cook time function set the period of time that the dish requires to
cook. For example, 1 hour.
- Using the end time function , set the time at which the dish is to be ready. In
this example, 14:05.
- The cook time and end time light up and the time is shown in the display.
In this example, 12:05.
- The oven will automatically switch itself on at the appropriate time as calculated.
In this example, at 13:05 and will switch itself off when the cooking time set has
elapsed. In this example, at 14:05.
C3248