11
Pan detection
The pan detection ensures a perfect safety. The induction doesn’t work:
•
If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a suitable pan is put on the heating zone.
• If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the zone off: don’t let the pan detection [ U ] remain active.
Residual heat indication
After switching off a heating zone or the hob completely, the heating zones are still hot and
indicates [ H ] on the display.
The symbol [ H ] disappears when the heating zones cool, and may be touched without danger.
When the residual heat indicators are on, don’t touch the heating zones and don’t put any heat
sensitive object on them. There are risks of burn and fire.
Starting-up
• Start up / switch off the hob:
Action Control panel Display
To start press key [ ] [ 0 ]
To stop press key [ ] nothing or [ H ]
• Start up / switch off a heating zone:
Action Control panel Display
To set slide on the “SLIDER“ [ 1 ] to [ P ]
(adjust the power) to the right or to the left
To stop slide to [ 0 ] on “SLIDER“ [ 0 ] or [ H ]
If no action is made within 20 seconds, the electronics returns in waiting position.
Booster function
The booster function [ P ] grants a boost of power to the selected heating zone.
If this function is activated the heating zones work during 10 minutes with an ultra-high
power. The booster is foreseen to rapidly heat up big quantities of water, and for cooking
things such as pasta.
• Start up / Stop the booster:
Action Control panel Display
Start up the Power Slide to the end of the “SLIDER” [ P ]
Or press directly on the end of
the “SLIDER”
Stop the Power Slide on the “SLIDER“ [ 9 ] to [ 0 ]
To Next Page
Loading...
