9Instruction manual C981G & C1081GPlease keep this instruction manual for future reference
- Prior to installation, ensure that the local distribution
conditions (nature of the gas and gas pressure) and the
adjustment of the appliance are compatible.
- Before powering the appliance, ensure that it is properly
adjusted for the type of gas available (see “installation”).
- It should be installed and connected in accordance with
current installation regulations. Particular attention shall be
given to the relevant requirements regarding ventilation.
- Ensure air is able to circulate around gas appliances.
Insufficient ventilation will lead to depletion of the oxygen
in the air in the place of installation.
- In case of intense or prolonged use of the appliance, it may
be necessary to increase ventilation, for example by opening
a window or increasing the power of extractor fans, if
present.
- Combustion products must be expelled from the place of
installation through an extractor hood or extractor fan (see
“Installation”).
- For any replacements or alterations that may be required,
contact Caple Service and use original spare parts only.
IMPORTANT:
The rating label, with the serial number, is affixed to the
underside of the hob.
To Next Page
Loading...
