18 Instruction manual CAFF46GM Please keep this instruction manual for future reference
USING THE APPLIANCE
› Before using your fridge freezer, wipe all parts with a solution of warm water and a
teaspoon of sodium bicarbonate. Then, rinse with clean water and dry. Return all parts to
the fridge freezer after cleaning.
› Remove all transport tapes and foam protection pieces.
Clean the interior with a cloth dampened in lukewarm
soap and water. Rinse with clean water and dry.
› Use the adjustable front legs to make sure your appliance
is level and stable You can adjust the legs by turning
them clockwise (or in the opposite direction). This should
be done before placing food in the fridge.
› Install the distance adjustment plastic (the part with
black vanes at the rear) by turning it 90° as shown in the
figure to prevent the condenser from touching the wall.
› Your fridge freezer may have an odour when it is operated for the first time. This is normal
and the odour will fade when your fridge freezer starts to cool.
› When the product is running, high temperature can be noticed on the side panels. This
is normal.
WARNING:
Connect to the electrical socket but do not switch the power to the refrigerator on for at least
12 hours. The coolant within the product needs time to settle after it has been transported and
put into position, failure to do this will affect the cooling performance of your appliance.
› Before using your fridge, wipe all parts with a solution of warm water and a teaspoon of sodium
bicarbonate. Then, rinse with clean water and dry. Return all parts to the fridge after cleaning.
› Remove all transport tapes and foam protection pieces. Clean the interior with a cloth dampened
in lukewarm soap and water. Rinse with clean water and dry.
› The adjustable front legs should be stabilized at an appropriate height to
allow your fridge to operate in a stable and proper way. You can adjust
the legs by turning them clockwise (or in the opposite direction). This
should be done before placing food in the fridge.
› Install the distance adjustment plastic (the part with black vanes at the
rear) by turning it 90° as shown in the figure to prevent the condenser
from touching the wall.
› Your fridge may have an odour when it is operated for the first time. This
is normal and the odour will fade when your fridge starts to cool.
WARNING:
Connect to the electrical socket but do not switch the power to the refrigerator on for at least 12
hours. The coolant within the product needs time to settle after it has been transported and put into
position, failure to do this will affect the cooling performance of your appliance.
To Next Page
Loading...
