25
TROUBLESHOOTING
TECHNICAL DATA
The microwave does not operate Check it is switched on at the mains
There has been a power cut
The time is not set
The control panel is not working Check to see if the child lock is on. If so, hold the
lock key to turn it off.
The interior lamp does not illuminate Contact Caple service
E2 error code appears on the screen Interior sensor error. Contact Caple service
Built-in Microwave
Model CM108SS / CM108BK
Rated voltage 220 - 240V ~
Rated frequency 50Hz
Rated Grill power -
Rated Microwave Input Power 1500W
Combination Power -
Microwave rated output power 1000W
Volume 40L
To Next Page
Loading...
