Caple CM126 - Auto Cooking Programs and Defrosting

Instruction manual CM12624
Please keep this instruction manual for future reference
CONVECTION COOKING (WITHOUT PRE-HEATING FUNCTION):
› Press the “CONVECTION“ key once, “130” flash.
› Keep pressing “CONVECTION” or turn “
2.
Microwave Cooking
OPERATION INSTRUCTIONS
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
When the microwave oven is switched on, the oven will display "0:00", a buzzer will
ring once.
2) Turn " " to adjust the hour figures, the input time should be within 0--23(24-hour)
or 1--12(12-hour).
3) Press " CLOCK/PRE-SET ", the minute figures will flash.
5)
Press " CLOCK/PRE-SET" to finish setting the clock. ":" will flash.
Note: 1) If the clock is not set, it will not function when powered up.
2) During the process of clock setting, if you press " STOP/CLEAR ", the oven
will go back to the previous status automatically.
1) Press " CLOCK/PRE-SET " to choose 12-hour or 24-hour.
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
Microwave Power Chart
Press
Microwave Power
Once Twice Thrice 4 times 5 times
80% 50% 30% 10%100%
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
1) Press the "MICROWAVE " key once, and "P100" display.
2)
Press " MICROWAVE" a few times or turn " " to select the microwave
power from 100% to 10%. "P100", "P80", "P50", "P30", "P10" will display in order.
3) Press "START/+30SEC./CONFIRM " to confirm.
4)Turn " " to adjust the cooking time. (The time setting should be 0:05- 95:00.)
5) Press " START/+30SEC./CONFIRM " to start cooking.
1.
Setting the clock
14
“ to select the convection function
NOTE:
The temperature can be selected from 130 degrees to 220 degrees.
› Press the “START/+30SEC./CONFIRM“ to confirm the temperature.
› Turn “
2.
Microwave Cooking
OPERATION INSTRUCTIONS
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
When the microwave oven is switched on, the oven will display "0:00", a buzzer will
ring once.
2) Turn " " to adjust the hour figures, the input time should be within 0--23(24-hour)
or 1--12(12-hour).
3) Press " CLOCK/PRE-SET ", the minute figures will flash.
5)
Press " CLOCK/PRE-SET" to finish setting the clock. ":" will flash.
Note: 1) If the clock is not set, it will not function when powered up.
2) During the process of clock setting, if you press " STOP/CLEAR ", the oven
will go back to the previous status automatically.
1) Press " CLOCK/PRE-SET " to choose 12-hour or 24-hour.
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
Microwave Power Chart
Press
Microwave Power
Once Twice Thrice 4 times 5 times
80% 50% 30% 10%100%
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
1) Press the "MICROWAVE " key once, and "P100" display.
2)
Press " MICROWAVE" a few times or turn " " to select the microwave
power from 100% to 10%. "P100", "P80", "P50", "P30", "P10" will display in order.
3) Press "START/+30SEC./CONFIRM " to confirm.
4)Turn " " to adjust the cooking time. (The time setting should be 0:05- 95:00.)
5) Press " START/+30SEC./CONFIRM " to start cooking.
1.
Setting the clock
14
“ to adjust the cooking time. (The maximum setting time is 95 minutes.)
› Press the “START/+30SEC./CONFIRM“ key to start cooking.
MULTI-STAGE COOKING:
Two cooking stages can be set. If one stage is defrosting, it should be put in the first stage. The
buzzer will ring once after each stage and the next stage will begin.
NOTE:
Auto menu and preheating cannot be set as one of the multi-stage options.
EXAMPLE:
If you want to defrost the food for 5 minutes, then to cook with 80%microwave power for 7
minutes. The steps are as following:
› Press “W.T./TIME DEFROST“ twice, the screen will display “dEF2”.
› Turn “
2.
Microwave Cooking
OPERATION INSTRUCTIONS
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
When the microwave oven is switched on, the oven will display "0:00", a buzzer will
ring once.
2) Turn " " to adjust the hour figures, the input time should be within 0--23(24-hour)
or 1--12(12-hour).
3) Press " CLOCK/PRE-SET ", the minute figures will flash.
5)
Press " CLOCK/PRE-SET" to finish setting the clock. ":" will flash.
Note: 1) If the clock is not set, it will not function when powered up.
2) During the process of clock setting, if you press " STOP/CLEAR ", the oven
will go back to the previous status automatically.
1) Press " CLOCK/PRE-SET " to choose 12-hour or 24-hour.
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
Microwave Power Chart
Press
Microwave Power
Once Twice Thrice 4 times 5 times
80% 50% 30% 10%100%
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
1) Press the "MICROWAVE " key once, and "P100" display.
2)
Press " MICROWAVE" a few times or turn " " to select the microwave
power from 100% to 10%. "P100", "P80", "P50", "P30", "P10" will display in order.
3) Press "START/+30SEC./CONFIRM " to confirm.
4)Turn " " to adjust the cooking time. (The time setting should be 0:05- 95:00.)
5) Press " START/+30SEC./CONFIRM " to start cooking.
1.
Setting the clock
14
“ to adjust the defrost time of 5 minutes.
› Press”MICROWAVE” once.
› Press “MICROWAVE” four times or turn “
2.
Microwave Cooking
OPERATION INSTRUCTIONS
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
When the microwave oven is switched on, the oven will display "0:00", a buzzer will
ring once.
2) Turn " " to adjust the hour figures, the input time should be within 0--23(24-hour)
or 1--12(12-hour).
3) Press " CLOCK/PRE-SET ", the minute figures will flash.
5)
Press " CLOCK/PRE-SET" to finish setting the clock. ":" will flash.
Note: 1) If the clock is not set, it will not function when powered up.
2) During the process of clock setting, if you press " STOP/CLEAR ", the oven
will go back to the previous status automatically.
1) Press " CLOCK/PRE-SET " to choose 12-hour or 24-hour.
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
Microwave Power Chart
Press
Microwave Power
Once Twice Thrice 4 times 5 times
80% 50% 30% 10%100%
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
1) Press the "MICROWAVE " key once, and "P100" display.
2)
Press " MICROWAVE" a few times or turn " " to select the microwave
power from 100% to 10%. "P100", "P80", "P50", "P30", "P10" will display in order.
3) Press "START/+30SEC./CONFIRM " to confirm.
4)Turn " " to adjust the cooking time. (The time setting should be 0:05- 95:00.)
5) Press " START/+30SEC./CONFIRM " to start cooking.
1.
Setting the clock
14
“ till “P80” display.
› Press “START/+30SEC./CONFIRM” to confirm.
› Turn “
2.
Microwave Cooking
OPERATION INSTRUCTIONS
This microwave oven uses modern electronic control to adjust cooking parameters
to meet your needs better for cooking.
When the microwave oven is switched on, the oven will display "0:00", a buzzer will
ring once.
2) Turn " " to adjust the hour figures, the input time should be within 0--23(24-hour)
or 1--12(12-hour).
3) Press " CLOCK/PRE-SET ", the minute figures will flash.
5)
Press " CLOCK/PRE-SET" to finish setting the clock. ":" will flash.
Note: 1) If the clock is not set, it will not function when powered up.
2) During the process of clock setting, if you press " STOP/CLEAR ", the oven
will go back to the previous status automatically.
1) Press " CLOCK/PRE-SET " to choose 12-hour or 24-hour.
NOTE: the step quantities for the adjustment time of the coding switch are as follow:
0---1 min : 5 seconds
1---5 min : 10 seconds
5---10 min : 30 seconds
10---30 min : 1 minute
30---95 min : 5 minutes
Microwave Power Chart
Press
Microwave Power
Once Twice Thrice 4 times 5 times
80% 50% 30% 10%100%
4) Turn " " to adjust the minute figures, the input time should be within 0--59.
1) Press the "MICROWAVE " key once, and "P100" display.
2)
Press " MICROWAVE" a few times or turn " " to select the microwave
power from 100% to 10%. "P100", "P80", "P50", "P30", "P10" will display in order.
3) Press "START/+30SEC./CONFIRM " to confirm.
4)Turn " " to adjust the cooking time. (The time setting should be 0:05- 95:00.)
5) Press " START/+30SEC./CONFIRM " to start cooking.
1.
Setting the clock
14
“ to adjust the cooking time of 7 minutes.
› Press “START/+30SEC./CONFIRM” to start cooking.
TIMED AUTO COOKING:
› Set the clock first. (Consult the instructions for setting the clock.)
› Input the cooking program. Two stages can be set at most. Defrosting should not be set in
pre-set function. The auto menu can be set for single stage cooking only.