Fig. 2.3a
Fig. 2.3b
The cooker is equipped with 4 levelling feet
which must be fitted to the base of the
cooker before use, in the following manner:
– Rest the rear of the cooker on a piece
of the polystyrene packaging exposing
the base for the fitting of the feet (figure
2.3).
– Screw the 4 levelling feet to the cooker:
it is important to observe
the prescrip-
tions of figures 2.3a - 2.3b.
– Stand the cooker and levelling it by
screwing or unscrewing the feet with a
spanner (fig. 2.4).
To Next Page
Loading...
