Instruction manual DD903BK & DD522BK
6
Please keep this instruction manual for future reference
We are constantly seeking to improve our products, we
reserve the right to modify their technical, functional, or
aesthetic characteristics deriving from their upgrading.
In the event a downdraft is installed with an external motor,
for normal downdraft operation, it is necessary to use an
external motor made by the same manufacturer.
The air collected must not be conveyed into a flue used
for smoke or fumes from appliances powered by anything
other than electricity (central heating systems, etc.). As far
as discharging exhaust air is concerned, please follow the
guidelines given by competent authorities.
There must be a minimum space of 50mm between the edge
of a gas hob and the downdraft frame.
To Next Page
Loading...
