EasyManua.ls Logo

Caple RBR7 - Operating Your Fridge

Caple RBR7
32 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17Instruction manual RBR7Please keep this instruction manual for future reference
OPERATING YOUR FRIDGE
THERMOSTAT SETTING
IMPORTANT NOTE
Do not try to rotate knob beyond 1
position it will stop your appliance.
The thermostat automatically
regulates the inside temperature of the refrigerator compartment and freezer compartment.
By rotating the knob from position 1 to 5, colder temperatures can be obtained.
For short-term storage of food in the fridge and freezer compartment, you can set the knob
between minimum and medium position (1-3).
For long-term storage of food in the fridge and freezer compartment, you can set knob
medium position (3-4).
For freezing fresh food, or to chill food quickly, set the knob to the high position (5). Once
the food is fully frozen or chilled, reset the thermostat to its original position.
Note that; the ambient temperature, temperature of the freshly stored food, and how often
the door is opened, affects the temperature in the refrigerator and freezer compartments. If
required, change the temperature setting.
When you first switch on the appliance, you should ideally try to run it without any food in
for 24 hours and not open the door. If you need to use it straight away, try not to put much
food inside.
If the unit is switched off or unplugged, you must allow at least 5 minutes before restarting
in order not to damage the compressor.
NOTE:
Do not try to rotate the knob anti-clockwise beyond position 1, it
will stop the appliance from working.
SUPER FREEZING
For maximum freezing capacity, press this switch 24 hours before
placing food in the freezing compartment. In order to save energy,
please turn the switch Off 24 hours after placing food in the freezer.
Instruction manual RBR6
Please keep this instruction manual for future reference
10
BEFORE USING YOUR FRIDGE
- When the appliance is situated for the first time or after
transportation, keep your fridge in the upright position for 12 hours
before connecting to the mains electricity. Otherwise, you may
damage the compressor.
- Your fridge may have a smell when it is operated for the first time;
the smell will fade away when your fridge starts to cool.
HOW TO OPERATE THE APPLIANCE
Thermostat setting
IMPORTANT NOTE:
Do not try to rotate knob beyond 1 position it will stop your appliance.
- The thermostat automatically regulates the inside temperature of the refrigerator
compartment and freezer compartment. By rotating the knob from position 1 to
5, colder temperatures can be obtained.
- For short-term storage of food in the freezer compartment, you can set the knob
between minimum and medium position (1-3).
- For long-term storage of food in the freezer compartment, you can set knob
medium position (3-4).
- Note that; the ambient temperature, temperature of the freshly stored food, and
how often the door is opened, affects the temperature in the refrigerator and
freezer compartments. If required, change the temperature setting.
- When you first switch on the appliance, you should ideally try to run it without
any food in for 24 hours and not open the door. If you need to use it straight
away, try not to put much food inside.
Super Freeze Switch

Related product manuals