Instruction manual WC1792 & WC1796
18
Please keep this instruction manual for future reference
INSTALLING THE WINE CABINET
1. Carefully unbox the cabinet and place on a flat, level floor.
2. If the door handing needs to be changed, do this before beginning the installation process (see
page 15).
3. The corner fixing brackets supplied in the accessories bag should be fitted to the top corners,
choosing the appropriate bracket depending on which side you are fitting. Place on the top
corner and fix to the wine cabinet with screws (see Fig. 1).
The corner bracket fixing positions can be adjusted to allow for correct alignment dependent on
your specific installation.
4. Using two people, carefully lift the appliance and place it into the furniture aperture.
NOTE:
It is important that the furniture cabinet is completely square and the base is level. If it is not level
the product may appear to lean, this is not a fault of the product and the installation must
be corrected (see Fig. 2).
Fig.1.
To Next Page
Loading...
