Why is my Caple WC6411 not cold enough?
Several factors can cause this. First, check and adjust the temperature control setting. The external environment might require a higher setting. Avoid opening the door too often and ensure it closes completely. Finally, inspect and repair the door gasket if it doesn't seal properly.
What to do if my Caple Wine Cooler is making too much noise?
Some noise is normal. Rattling may be due to refrigerant flow, and gurgling sounds occur as the cycle ends. Popping and crackling can result from the contraction and expansion of the inside walls. However, if the noise seems excessive, ensure the wine cabinet is level.
What to do if my Caple Wine Cooler compressor turns on and off frequently?
This can occur if the room temperature is hotter than normal, so consider cooling the room. If you've added a large amount of contents recently, allow time for the temperature to stabilize. Also, minimize how often you open the door and ensure it's properly closed. Check that the temperature control is correctly set and that the door gasket seals properly; repair the gasket if needed.
What to do if my Caple WC6411 Wine Cooler light does not work?
First, ensure the appliance is plugged in and that the circuit breaker hasn't tripped, and the fuse isn't blown. If those are fine, replace the burnt-out bulb. Also, check that the light button is in the “ON” position.
Why my Caple WC6411 Wine Cooler does not operate?
First, ensure the appliance is properly plugged in and turned on. If it still doesn't operate, check the circuit breaker or replace the blown fuse.
How to fix a Caple WC6411 Wine Cooler door that will not close properly?
First, make sure the wine cabinet is level. If the door was reversed, ensure it is reinstalled correctly. Clean the door gasket if it's dirty, and reposition the shelves if they are out of place.
General| Brand | Caple |
|---|---|
| Model | WC6411 |
| Category | Wine Cooler |
| Language | English |
To Next Page
