19
Instruction manual WMi4001
Please keep this instruction manual for future reference
OPENING THE DOOR
A special safety device prevents the door from being opened immediately after the end of the
cycle. Wait for 2 minutes after the wash cycle has finished and the “Door Security” light has
gone out before opening the door.
PROGRAMME SELECTOR WITH OFF POSITION
When the programme selector is turned the display lights up to show the settings for the
programme selected. For energy saving, at the end of the cycle or with an inactivity period, the
display level contrast will decrease.
NOTE:
To switch the machine off, turn the programme selector to the OFF position.
Press the
START/PAUSE button to start the selected cycle.
Once a programme is selected the programme selector remains stationary on the selected
programme till cycle ends.
“END” will appear in the display at the end of the programme and the DOOR LOCKED light
will go off. It will now be able to open the door.
Switch off the washing machine by turning the selector to
OFF.
The programme selector must be returned to the
OFF position at the end of each cycle or when
starting a subsequent wash cycle prior to the next programme being selected and started.
START/PAUSE BUTTON
Close the door
BEFORE selecting the button START/PAUSE.
Press to start the selected cycle.
When the
START/PAUSE button has been pressed, the appliance can take few seconds before
it starts working.
PAUSING THE MACHINE
Keep the
START/PAUSE button pressed for about 2 SECONDS (some light indicators and the
residual time display will flash, showing that the machine is paused).
To Next Page
Loading...
