10 Instruction manual WMi4001 Please keep this instruction manual for future reference
INSTALLATION
UNPACKING THE WASHING MACHINE
Unpack your washing machine and check if there is any damage during the transportation. Also
make sure that all the items (as shown on page 9) in the attached bag are received. If there is
any damage to the washing machine during the transportation, or any item is missing, please
contact your retailer immediately.
DISPOSE OF THE PACKING MATERIALS
WARNING:
Keep packaging materials away from children.
The packing materials of this machine may be dangerous to children. Please dispose of them
properly. Please dispose of the related packing materials according to the relevant local
regulations. Please do no throw the packing materials away together with the other daily
living disposals.
REMOVE TRANSPORT BOLTS
Before using this washing machine, transport bolts must be removed from the backside of this
machine. Please take the following steps to remove the bolts:
1. Loosen all bolts with spanner and then remove along with the flat washers, rubber bungs
and plastic spacer tubes.
2. Cover the open transportation bolt holes with the plastic
cap included in the instruction bag.
3. Keep the transport bolts, flat washers, rubber bungs and
plastic spacer tubes stored away safely for future use.
NOTE:
During the removal of the bolts, spacer tubes fall inside the product. These can be removed
by tilting the product forward and recovering them from the floor or inside the base of the
machine.
To Next Page
Loading...
