What to do if my SmartLinx Axon Medical Equipment has no power or no LEDs turn on?
First, verify that the On/Off switch is in the On position. If you're using Power-over-Ethernet, ensure the Ethernet cable is connected to a PoE-compliant plug and that the Ethernet switch provides adequate power. Also, inspect the cable for damage, overheating, or corrosion; if any of these are present, replace the cable.
What to do if I have network connection problems with my SmartLinx Axon Medical Equipment?
First, check that the Ethernet LED is lit, which indicates a stable connection. If using a wired connection, ensure the Ethernet cable is properly connected at both ends. If using a wireless connection, verify that wireless mode is enabled. You can also try to ping the SmartLinx Axon to test the connection and verify the network settings and encryption mode.
Explains the different levels of hazard warnings used in the documentation for safety.
Outlines deployment configurations, precautions, and mounting recommendations for safe operation.
Explains connecting the SmartLinx Axon to AC power or Power-over-Ethernet for operation.
Guides connecting the SmartLinx Axon to wired and wireless networks for data transfer.
Provides instructions for connecting medical devices using DIMs and cables for data acquisition.
Offers solutions for device issues, network problems, and wireless connection troubleshooting.
Explains how to access and use the web-based configuration application for device setup.
Guides through defining wired/wireless network settings, serial ports, and SNMP parameters.
Covers management operations like certificate management, configuration backup, software updates, and rebooting.
General| Category | Medical Equipment |
|---|---|
| Device | SmartLinx Axon 410 |
| Manufacturer | Capsule Technologies |
| Model | Axon 410 |
| Connectivity | Ethernet, Wi-Fi |
| Power Supply | AC Power Adapter |
| Weight | 1.5 kg |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10 to 90% RH, non-condensing |
| Compliance | CE Marked |
| Type | Medical Device Integration System |
To Next Page
