Operation Instructions
10
WARNING:
In the connection process, make sure:
ENJOY YOUR CAPTIVA DESIGNS
Screw in the LPG cylinder into the gas regulator, turning the cylinder clockwise.
The regulator may make a humming or whistling noise during operation.
This will not affect safety or use of theappliance.
DO NOT cross thread the connection between your LPG cylinder and regulator or regulator and gas rail.
Cross threading can occur if you force thread a connection at an improper angle. This will damage the
threads, lead to propane leaking, and potentially result in a build-up of fuel that can ignite.
If you can not connect the regulator, DO NOT use the regulator.
Regulator must be replaced with a Captiva Designs approved model by a professionally licensed,
authorized dealer.
Use this appliance, as purchased, only with gas and regulator/valve assembly supplied.
If regulator fails in unit, it must be replaced with a Captiva Designs approved model (found on your
Manufacturer label) by a professionally licensed, authorized dealer. Failure to comply will void the
warranty.
S
t
e
p
0
2
To Next Page
Loading...
