EasyManua.ls Logo

Captiva Designs E02GR021 - Operation Instructions; Connect LPG Cylinder; LPG Cylinder Positioning

Captiva Designs E02GR021
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation Instructions
9
WARNING:
WARNING:
All instructions and safeguards on this page must be followed to prevent re, damage and/or injury.
ENJOY YOUR CAPTIVA DESIGNS
Insert the regulator and LPG cylinder into the gas line of the appliance. Turn the collar of the regulator
clockwise to secure it to the gas line.
1LB(453 G)
S
t
e
p
0
1
5
CONNECT THE LPG CYLINDER
The LPG cylinder supply system must be arranged for vapor withdrawal.
Always keep new LPG cylinders in upright position during use, transit or storage.
Ensure that the LPG cylinder is positioned below the regulator. (If the liquid level of the propane is above the
regulator, the regulator will frost.)
The gas regulator is intended to be used at an
angle towards the rear of the appliance.
IF FROSTING PERSISTS AFTER BOTTLE IS ANGLED CORRECTLY:
Turn off the appliance and disconnect LPG cylinder immediately.
This indicates a problem with the LPG cylinder and it should not be used on any product.

Related product manuals