WARNING
Improper work on electrical systems!
Electric shock can result in death or life-
threatening injuries.
4
Before working on electrical systems,
disconnect them from their voltage supply
and secure them against being switched on
again.
4
Work on electrical installations should be
carried out only by qualified personnel in
compliance with local and national electrical
regulations and specifications.
Personnel qualifications
A qualified electrician is a person with suitable technical training,
expertise and experience as well as knowledge of relevant
standards, who can evaluate the work assigned to them
correspondingly and recognize potential risks.
Intended use
The SENSORswitch is intended for use in accordance with the
items listed here, the values from the “Technical specifications”
chapter and the product description.
■
Only connect the product to a limited energy source as per IEC
61010 or an NEC class 2 power supply unit.
■
Source current < 4 A at maximum operating voltage.
Reasonably foreseeable misuse
The switch is not suitable for:
•
use as a foot switch.
•
use in potentially explosive atmospheres.
•
use with inductive loads without a free-wheeling diode.
•
use as a safety component as per directive 2006/42/EC.
To Next Page
Loading...
General